valutazioni - 2, GPA: 3.5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
The PAN control located below adjusts the stereo position of the signal between the odd (ODD) group and left (L) outputs and the even (EVEN) group and right (R) outputs. 5 7BAL/PAN control The BAL/PAN knob adjusts the balance or the L/R position of the stereo module signal. For example if this knob is turned all the way to the left, the signal will be sent only to the L and odd (ODD) groups whose assign switches are pressed. If it is turned all the way to the right, the signal will be sent only to the R and even (EVEN) groups. If the knob is set to the center position, the same amount of signal will be sent to the stereo L and R, and the odd/even groups. 8LEVEL control This adjusts the output level of the stereo module. MX400 User’s Guide Front and rear panels Front and rear panels This switch turns the stereo module on/off. When the switch is pressed the stereo module is on. Be sure to turn off input modules that are not in use. Even when a module is off, the SIGNAL and PEAK indicators will light if a signal is being input. You can also use the PFL switch to monitor the signal even if a module is off. 0PFL switch PFL is an acronym for Pre-Fader Listen. This switch allows you to monitor the signal of the stereo module regardless of the fader position, the settings of the ON switch, the group assign switches, or the AUX settings. As the name suggests, the signal is taken pre-fader (post EQ). You may listen to an individual module, or to two or more modules simultaneously. MX400 User’s Guide AUX SEND module AUX SEND module 10 5 0 5 10 15 20 30 40 . PEAK 0 –20 ON AFL TO ST LR PAN ON AFL 10 5 0 5 10 15 20 25 30 40 . AUX SEND module 1AUX SEND fader This adjusts the signal level of the AUX SEND output. A position at the zero (0) marking is the nominal level. Raising the fader above 0 provides up to 10dB of gain. 1 2PEAK indicator This indicator lights when the level of the input signal reaches 3dB before clipping. 3Signal (0/–20) indicator The 0dB indicator (yellow) lights when the output signal level reaches +4dB. The –20dB indicator (green) lights when the output signal reaches –16dB. 2 4ON switch 3 This switch turns the AUX SEND on/off. When the switch is pressed in it is turned on. When off, no signal will be output from the corresponding AUX 4 SEND jack. 55AFL (After Fader Listen) switch This monitors the AUX SEND signal. This is on when the switch is pressed in. 1 GROUP module 1TO ST switch 2 This sends the GROUP signal to the stereo bus. 2PAN control 3 This adjusts the panning of the signal sent to the stereo bus. 4 3ON switch This switch turns the GROUP on/off. The group is on when the switch is pressed in. When off, no signal will be output from the corresponding GROUP OUT jack. 4AFL (After Fader Listen) switch This monitors the GROUP signal. This is on when the switch is pressed in. 5Group fader 5 This fader adjusts the signal level of the GROUP output. MX400 User’s Guide Front and rear panels Front and rear panels 2TR IN MONI ST2 ON L+R 10 5 0 5 10 15 20 25 30 40 . ST2/MONITOR module 1PFL indicator 1 This indicator (yellow) will light when the PFL switch of one or more modules is turned on. 2 22TR IN switch This switch selects the 2TR IN input signal. This signal will be sent to the 3 headphone jack and to the ST2/MONI OUT jack. When this switch is on, the 2TR IN input signal will be sent regardless of each module’s PFL and 4 AFL switch settings. 53MONI/ST2 switch This switch selects the signal that is output to the ST2/MONI OUT jack. When the switch is in the “ST2” position, the signal will be the same as the signal that is sent to the ST1 OUT jack. When the switch is in the “MONI” position, the signal will be taken from the PFL bus, AFL bus, or the 2TR IN jack. 4ON switch This switch turns the ST2/MONITOR module on/off. When the switch is pressed in the module is on.When the module is off, no signal will be output from the ST2/MONI OUT jack. 6 5L+R switch This switch causes a mono mixed signal to be output from the ST2/MONI OUT jack. 6ST2/MONITOR fader This fader controls the signal level of the ST2/MONITOR output. MX400 User’s Guide Master module (L-ST1-R) Master module (L-ST1-R) 9 POWER 1 PHANTOM 2 3 TALKBACK IN GRP 1–4 AUX 1–4 4 ST 5 0 10 LEVEL TB 6 0 10 REC OUT 7 0 10 0 10 TAPE IN PHONES ON 10 10 5 5 0 0 0 5 5 10 10 15 15 20 20 25 25 30 30 40 40 . . L — ST 1 — R Master module (L-ST1-R) 1POWER indicator This indicator lights when the power switch is turned on. 2PHANTOM indicator This indicator lights when the PHANTOM switch is turned on, indicating that phantom power is being supplied. 3TALKBACK IN jack This is an unbalanced XLR type jack for connecting a talkback mic. The nominal input level is –50dB. 4Assign switches (GRP 1-4, AUX 1-4, ST) These switches select the output destination (mix bus) of the talkback mic. 5LEVEL control This adjusts the signal level of the talkback mic. 6TB switch This switch controls the talkback signal. When it is pressed, the talkback signal will be sent to the outpu...
Questo manuale è adatto anche per i modelli :Strumenti Musicali - MX400-12 (935.15 kb)
Strumenti Musicali - MX400-16 (935.15 kb)
Strumenti Musicali - MX400-8 (935.15 kb)