valutazioni - 2, GPA: 3.5
(
)
)
|
Facilità d'uso
*WARNING • Before using the instrument, be sure to carefully read through the instructions contained in this leaflet. Do not climb up onto the instrument or stand. • Be sure to keep all user documentation handy for future reference. Doing so can cause the stand to tip over, creating the risk of personal injury. Particular care concerning Symbols this precaution is required where small children are Various symbols are used in this leaflet and on the present. product itself to ensure that the product is used safely and correctly, and to prevent injury to the user and other persons as well as damage to property. Those symbols along with their meanings are shown below. *CAUTION About the stand *WARNING • This stand is intended for use with a CASIO Digital This indication stipulates matters that have the risk Keyboard only. of causing death or serious injury if the product is I m p r o p e r u s e o f t h i s s t a n d c a n c a u s e t h e operated incorrectly while ignoring this indication. instrument to fall or the stand to tip over, creating the risk of personal injury. *CAUTION Be sure to observe the following points. – U s e t h i s s t a n d o n l y w i t h t h e C A S I O D i g i t a l This indication stipulates matters that have the risk Keyboard model for which it is intended. of causing injury as well as matters for which there is the likelihood of occurrence of physical damage only – Do not try to use this stand for any other purpose if the product is operated incorrectly while ignoring or application. this indication. – Be sure to remove the instrument from the stand before trying to move the stand. – Be sure to remove the instrument from the stand before trying to adjust the height of the stand. *WARNING – The bolt of the stand can work loose due to the effects of temperature and humidity changes, Do not allow the bag to be placed over the vibration, and other factors. Because of this, you need to periodically check the bolt for proper Never place the plastic bag this stand c omes in head or ingested. tightness. over your head or in your mouth. Doing so creates • B e s u r e t o f o l l o w t h e a s s e m b l y i n s t r u c t i o n s the risk of suffocation. Particular care concerning precisely when assembling the stand and mounting this precaution is required where small children are the instrument on it. Failure to adequately tighten present. the bolt or improper positioning of the instrument can cause the stand to tip over and the instrument Avoid locating the instrument or stand on to fall, creating the risk of personal injury. an unstable surface. • When placing the instrument onto the stand, take care that you do not pinch your fingers. Do not locate the instrument or stand on an unsteady • N e v e r rem o v e th e bol t w h il e t h e ins t rum e n t i s p l a tf o r m , o n an u n e v e n s u r f a c e , o r i n a n y o t h e r mounted on the stand. Doing so can cause the unstable location. Doing so can cause the stand to fall keyboard to fall and creates the risk of your hands over, creating the risk of personal injury. becoming pinched by the stand legs. About the stand Do not place heavy objects on the keyboard. • When using the stand, make sure the two longer Do not place heavy objects on the keyboard. This lengths of horizontal piping are on the floor (shorter may cause the keyboard to tip over or fall off the lengths under the instrument). Never try to use the stand. stand while it is upside down. • Do not drop the stand or otherwise subject it to strong impact. Parts List Allen wrench . 1Fastening tape . 8 • 4 p i e c e s p e r s e t . U s e w h e n changing the stand height, etc. Cushioning sponges . 3 Bolt . 1 Washer . 1 Nut . 1 Stand Assembly / Mounting the Keyboard onto the Stand 1. With the longer lengths of horizontal piping towards the floor, pull the short pipes apart to expand the stand. Fix the stand in its open position. As shown at • in Figure 1, pass the bolt through the washer and then through the hole in the stand. Affix the nut and then tighten with the Allen wrench that comes with the stand. • Tighten the bolt to the point that there is no space between the washer and bolt. • Y o u ca n a d j u s t t h e st a n d t o e i t h e r o f t w o heights. 2. Affix the fastening tape to the bottom of the instrument as shown in Figure 2. • Position four pieces of tape so they align with the tape on the stand, as shown in Figure 1 (a). 3. P l a c e t h e i n s t r u m e n t o n t o t h e s t a n d (Figure 3). • Adjust the position of the instrument so the pieces of fastening tape engage with each other. * If the stand is unstable, affix the cushioning sponges to the pipes of the legs (Figure 4). • Peel the tape from the backs of the sponges and then install them. • Be sure to remove the instrument from the stand before affixing the sponges. Figure 1 Figure 2 Figure 3 Figure 4 (a) (a) (a) (a)• ...