valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
4-3 Specify a “In Time” value for the “Length” parameter. Specify the duration that is slightly longer than that of the selected MIDI data. For example, if the data consists of three five-minute songs, specify something like “16 min 0 sec 0 msec.” 4-4 Click the [New] button. The “New” window closes. 5 Digital recording 5-1 From the [Options] menu, select [Windows Sound Device Configuration...], then select “YAMAHA UW10” or “USB Audio Device” for “Input” and “Output”. 5-2 Click the Record button in TWEplus, then immediately activate the XGPlayer window and click the Play button. 5-3 When the playback in XGPlayer finishes, click the Stop button in TWEplus. Storing digital recordings on a music CD 1 Start your CD writer software. 2 Save each song file on a music CD. For more information on storing data on a music CD, refer to the documentation for your CD writer software. UW10 Owner’s Manual Specifications Audio Capability: One stereo-line recording One stereo-line playback Sampling Frequencies Input:32 kHz, 44.1 kHz, 48 kHz Output:32 kHz, 44.1 kHz, 48 kHz Jacks and connectors: Digital in jack (optical) Digital out jack (optical) Line in jacks (RCA pin, L/R) Line out jacks (RCA pin, L/R) USB connector Headphone jack (stereo mini) Power Supply: USB bus power supply Dimensions: 111(W) Z .... 65(D) Z .... 31(H) [mm] Weight: 95g Option: Optical digital cable (with optical plugs) Specifications and descriptions in this Owner’s Manual are provided for information purposes only. Yamaha Corporation reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. Troubleshooting (FAQ) . The driver cannot be installed. . Is the USB cable connected correctly? > Check the USB cable connection. (page 13) > Disconnect the USB cable, then re-connect it. . Is the USB function enabled on your computer? > When you connect the UW10 to the computer for the first time, if the “Add New Hardware Wizard” (page 16) does not appear, the USB function on the computer may be disabled. Perform the following steps. 1. Select [Control Panel | System | (Hardware) | Device Manager]. 2. Make sure that “Universal Serial Bus Controller” and “USB Route Hub” are not marked with “!” or “x.” If one of these items is marked with “!” or “x,” you cannot use USB connections. For more information, refer to the documentation that came with your computer. English UW10 Owner’s Manual English B Is any device recognized as an unknown device? > If driver installation fails, the UW10 will be recognized as an “Unknown device,” and you will not be able to install the driver. Delete the “Unknown device” by following the steps below. 1. Select [Control Panel | System | (Hardware) | Device Manager]. 2. Check the “View devices by type” radio button (for Windows Me users), or select “Devices by type” from the “View” menu (for Windows 2000/XP), then check whether there are any “Other devices.” 3. If an “Other devices” is listed, double-click it. If there is “Unknown device” listed below it, select the “Unknown device”, then click the [Delete] button. 4. Remove the USB cable from the UW10, then re-connect it. 5. Try to install the driver again. B Are you using a USB hub? > If the UW10 is connected to a USB hub that is powered by the USB bus power supply, the UW10 will not operate. > Connect the UW10 directly to the computer, then try to install the driver again. If the computer has multiple USB connectors, try to connect the UW10 to another USB connector. B Is another USB device connected to the computer? > The driver may not be installed correctly if another USB device is active. Disconnect your printer, scanner, or other USB device, then try to install the driver again. > If the driver for another USB audio device has already been installed, you can use that driver for the UW10. . The UW10 does not operate correctly, or no sound is heard. . Did you install the driver? (page 16) . Are the USB cable, MIDI cables, and audio cables connected correctly? (page 13) . Is the volume setting of the tone generator, playback device, and applica tion program set to the appropriate level? . Have you selected an appropriate device for your audio application? . Is the sampling frequency set correctly? > Refer to the table on page 25. B Are there wave files for which the sampling frequency and bit resolution settings vary? > Some audio applications may not simultaneously play wave files with different sampling frequencies and bit resolutions. B (You cannot play a music CD) > Check the “Enable digital CD audio for this CD-ROM device” checkbox (page 22). UW10 Owner’s Manual . (You do not hear any sound digitally input from a connected MD or CD player.) > Is the SOURCE SELECT switch set correctly? (page 13.) > Is the input signal copyright protected? (page 7.) . The sound is interrupted or distorted. . Does your computer satisfy the syste...