valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
The procedure you use for recording to Tracks 2 through 6 is identical to the one you use when recording to Track 1. To record to Tracks 2 through 6 using real-time recording You can record to Tracks 2 through 6 while playing back what you originally recorded on Track 1 and any other tracks that are already recorded. 1 Press the SONG MEMORY button twice to enter record standby, and then use the number buttons to select a song number (0 to 4). • The song number you select should be the one where you previously input Track 1. 2 Use the SONG MEMORY TRACK buttons to select the track you want to record to (2 through 6). • While the digital piano is in record standby, the display shows the level meters for channels 11 through 16, so you can check which tracks have already been recorded. See “Level Meter Contents During Record/Edit Standby” on page E-58 for details. 3 Make the following settings. • Tone number • Tempo 4 Press the START/STOP button to start recording. • At this time, the contents of any tracks that are already recorded start to play back. • The pedal and pitch bend operations are also recorded. 5 Use the keyboard to play what you want to record the track you selected. 6 Press the START/STOP button to end recording when you are finished. Track Contents After Real-time Recording In addition to keyboard notes, the following data is also recorded to the selected track during real-time recording. This data is applied whenever the track is played back. • Tone number • Pedal operations The following data is recorded in the header whenever you start a recording of a track. • Mixer settings of other tracks • Effect type • Accompaniment volume • Reverb Level • Chorus Level • DSP Hold On/Off • Mixer Hold On/Off • Pitch bend wheel operation • Pitch bend range Song Memory Function To record to Tracks 2 through 6 using step recording This procedure describes how to input notes one-by-one, specifying each note’s pitch and length. 1 Press the SONG MEMORY button three times to enter real-time record standby, and then use the number buttons to select a song number (0 to 4). • The song number you select should be the one where you previously input Track 1. Sg1 Step Re c 2 Use the SONG MEMORY TRACK buttons to select the track you want to record to (2 through 6). Example: Select Track 2. Flash 3 Specify a tone number. • Pressing a TONE button or the DRAWBAR ORGAN button displays the tone number and name on the display. You can then use the number buttons, or the [+] (increase) and [–] (decrease) buttons to change the tone. • After changing the tone number, press any keyboard key to clear the tone number and name screen, and return to the note input screen. 4 Use the keyboard keys to input notes, or the [0] button to input rests. • At this time, the display shows the keyboard pressure (velocity). Use the [+] (increase) and [–] (decrease) buttons to change the velocity. • You can also input a chord. 5 Use the number buttons to input the length of the note or rest (page E-56). 6 Repeat steps 4 and 5 to input more notes. 7 Press the START/STOP button to end recording when you are finished. NOTE • Use the procedure under “Correcting Mistakes While Step Recording” on page E-59 to correct input mistakes you make during step recording. • You can add on to a track that already contains recorded data by selecting that track in step 2 of the above procedure. Doing so automatically locates the step recording start point at the first beat immediately following the previously recorded data. • Whenever you are recording to Tracks 2 through 6, the entire keyboard functions as a melody keyboard, regardless of the current MODE button setting. • When playing back data recorded with Advanced Tones at the beginning of multiple tracks, the digital piano uses the DSP type of the Advanced Tone that is recorded in the track with the largest track number. • When playing back a track that was recorded with an Advanced Tone selected, they may be a slight delay before the first note of the track sounds. If this happens, try to insert a very short rest at the beginning of the track. Track Contents After Step Recording In addition to notes and rests, the following data is also recorded to the track during step recording. This data is applied whenever the track is played back. • Tone number Level Meter Contents During Record/ Edit Standby Channels 11 through 16 correspond to Tracks 1 through 6. Whenever the digital piano is in record or edit (page E-60) standby, the level meter display shows which tracks already contain recorded data and which are still empty. Tracks with four lit segments already contained recorded data, while tracks with one lit segment are not yet recorded. Recorded track Not recorded track Song Memory Function Correcting Mistakes While Step Recording Memory data can be thought of as a musical score that progresses from left to right, with the input point normally at the far right of the recorded data. The procedure described here...
Questo manuale è adatto anche per i modelli :Strumenti Musicali - Privia PX410 (2.8 mb)