Log:
valutazioni - 3, GPA: 3.3 ( )

Istruzioni per l'uso Chauvet, Modello Ch-310

Produttore : Chauvet
File Size : 50.01 kb
File Nome : ch-310_ug-168.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


Screw Cap Fuseholder . Cooling Fan . Voltage Selector (Not on European Model) Fig. 1 Mounting Bracket Lamp Replacement Cover Colored Lenses At the Rear: . Audio Sensitivity Adjustment . Screw Cap Fuseholder . Cooling Fan . Voltage Selector (Not on European Model) Fig. 1 Mounting Bracket Lamp Replacement Cover Colored Lenses Introduction Congratulations on the purchase of your new CHAUVET enjoy many trouble free hours with this unit. To assist with the have prepared this short guide. Operation Before connecting this unit to the mains power supply for the first time you lamps. (See ‘Replacing Lamps’ for details). This lighting effect has been designed to function on a mains power supply of either or 230V~50Hz and has been fitted with a suitable power plug for use with your local Check the label and voltage selector switch (if fitted) on the unit and the power plug for correct voltage. When connected to the mains power supply the unit should illuminate and the fan should rotate. As the effect is sound activated it may be necessary to adjust the audio sensitivity control. Due to the high operating temperature of halogen lamps it is advisable that the effect be used in well ventilated areas taking care not to obstruct the air vents or the fan. After use allow time to ‘cool’ for safety and to ensure lamp life before moving or touching. The duty cycle for this effect should be no more than 15 minutes on then 15 minutes off. Installation / Mounting This unit has been designed to be hung. It is recommended that, for safety purposes, your lighting effect be properly mounted using a suitable hanging clamp and safety cable. CHAUVET offers a range of items, which are ideal for safe mounting. Use in a well-ventilated area without obstruction to the fan. Replacing Lamps 1. Disconnect from main power supply before attempting to replace either lamps or fuse. 2. Ensure that the unit is sufficiently cool, before removing blown lamps. 3. Never touch new lamps with your fingers; use a tissue or a cloth. In order to replace replacement cover, lamps as use of any Due to the nature of halogen replacement lamp with your tissue or cloth can be used for fitting the replacement has blown, it is advisable that you Finally before using, check that the lamps lamp replacement cover has been screwed If after replacement of the lamps, the unit is still CHAUVET for servicing. Replacing Fuses If the unit does not function at all when connected to the main rotate or the mechanism does not spin. Then it is highly likely that Disconnect from main power supply before attempting to replace either In order to replace the fuse, disconnect from the main power supply first, and fuseholder cover to reveal the fuse. The unit has a label attached which indicates rating and you will also find this listed as part of the specifications for the unit later is most important that replacement fuses are of the correct rating. Failure to use the could damage the lighting effect beyond economic repair. The fuse should simply be placed inside the holder and the screw cap replaced, when this done connect to the main power supply to check. If the unit is still not working then please contact your dealer or CHAUVET for servicing. Cleaning The most important part of your lighting effect to keep clean are the lenses as they allow the light output to transmit. These should be cleaned with a soft damp cloth. The body of the unit may also be cleaned in the same way. We recommend internal cleaning be carried out by a fully qualified technician. Maintenance & Servicing Work on internal parts should be carried out by a qualified technician. Removal of any covers other than the lamp replacement access or the fuseholder is considered a breach of warranty and will not be covered under any such agreement unless authorized first by the company. Troubleshooting • If the unit is not functional – check main power supply is ‘on’ and check fuses. • If the unit is functional but lamps do not light - lamps may require replacing. • If the unit lights but will not move - adjust sensitivity control. If after trying this solution you still have a problem contact your dealer or CHAUVET. ...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie