Log:
valutazioni - 4, GPA: 4.3 ( )

Istruzioni per l'uso M-Audio, Modello Music Mixer

Produttore : M-Audio
File Size : 2.78 mb
File Nome : 050103_XSession_UG_01EN_V1.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


The Getting Started Guide should insure that you are now familiar with the basic operation of the X-Session so that we now can focus on more in-depth features. First however, we need to explain some terminology we use throughout the guide. Terminology Edit Mode: Edit Mode describes the short period after a function button has been pressed during which the parameters of that function can be altered. The numeric keypad can be used to alter a parameter during this time. No data is sent out of the X-Session when it is in Edit mode except for program and bank changes. LCD symbols shown in Edit mode will flash to show you that a particular parameter can be edited. If a number is part entered, and a new controller turned, that number will become the relevant parameter number for the new controller and the 3 second editing period will re-trigger. Default mode: Default Mode describes the state of the X-Session, when no function buttons have been pressed within the last 3 seconds. In Default mode, the LCD will show the controller symbol, and the 2 digit display will show the last selected controller. The 3 digits display the currently assigned MIDI CC number. “On the Fly” Operations Sending Program Changes On The Fly You can at any one time send out a program change message to you sound card, sound module, instrument or whatever other device will receive this standard MIDI message. The program change will be sent on the global MIDI channel. 1. Press the PROGRAM button. 2. Type in the program number you wish to send, using the numerical keypad or the +/- keys. Example: The LCD display the PROG symbol in the right hand corner Indicating that the PROGRAM button has been pressed. The program value sent is 00 and its sent on the global MIDI channel 01. You can also program the assignable buttons to send out fixed program messages to individual MIDI channels. Global MIDI channel: For more information, please go to page 6. Sending Bank Changes On The Fly If your receiving device has more than 128 presets, you may be able to access the additional banks by sending out bank change LSB and MSB messages. 1. Press the DATA LSB or DATA MSB button. 2. Type in the bank number you wish to send, using the numerical keypad on the +/- keys. Please check the documentation for your receiving device to ensure that it will respond to these messages. For more information about LSB and MSB, please see the chapter “Program and Bank Changes Explained” on page 9 in this manual. Sending Snap Shot Press the +/- buttons together to send a SNAP SHOT of the current X-Session controller assignments and their values. When you send a snapshot, the LCD will display the SNAPSHOT symbol. The data for an individual controller will be sent on which ever channel that controller has been assigned to. Snap Shot is one way of synchronizing the receiving device with the X-Session and can be used as a creative tool, with interesting and surprising results. The data sent when SNAP SHOT is pressed, can be viewed in your sequencers list editor. Set your sequencer to record and press SNAP SHOT. Then open the list editor and ensure its set to display controller data. Muting All Controllers To Mute all controllers and the cross fader, press the CTRL MUTE buttons. This allows you to alter the position of the controller without affecting the settings of your software. CTRL MUTE does not affect buttons, and as soon as an assignable button or a function key is pressed, the controllers are turned back on. Alternatively, you can press the CTRL MUTE buttons again to turn the controllers back on. English Introduction • 3 When you first press the CTR MUTE buttons, you will see the LCD display ’OFF’. Changing the position of a controller with controller mute engaged, the LCD will always display OFF to indicate no data is being sent out by the X-Session. To cancel the controller mute function, simply press a function key (or keys) or one of the assignable buttons. This is a very useful feature if you are switching between presets on the X-Session With the controllers out of position. You will be able to move the controller to a position relative to the software’s controller value, rather than causing the software’s controller value to jump. You can also use this feature for creative mixing and interesting DJ type control. If for instance you use the X-Session as a conventional volume mixer, try engaging the controller mute function, change the volume up or down of various channels and press the SNAP SHOT buttons. This form of mixing is very dynamic and can not be done using a conventional mixer. About the Cross Fader The cross Fader can be assigned to two MIDI CC values, by editing F17 and F18. When it is moved, both F17 and F18 will be sent out. F17 will increment from left to right, while F18 will increment from right to left. So, F17 and F18 work against each other. As an example, this has been put to practice in the Rebirth preset: F17 controls the volume of the top drum modul...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie