valutazioni - 4, GPA: 4.3
(
)
)
|
Facilità d'uso
In the unlikely event your unit may require service please contact your nearest American DJ dealer. PLEASE do not discard the shipping carton in the trash. Please recycle when ever possible. Safety Issues: This unit may blow a fuse if the maximum allotted load of 5 amps is reached. If the fuse needs replacement, always replace the fuse with same exact type that was remove, unless otherwise instructed by an authorized American DJ® service technician. Use of a different type fuse from that which is recommended may cause fire or electric shock and will void the manufactures warranty. ©American DJ Supply® - - Groove Wheel™ Instruction Manual Page 2 Groove Wheel™ General Instructions Please carefully read and understand the instructions in this manual thoroughly before attempting to operate this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference. Groove Wheel™ Precautions • Keep the outside of this device dry at all times. Do not spill water or other liquids into or on to your unit. To prevent fire or shock hazard, do not expose this product to rain or moisture. • Be sure to save the packing carton in the event you may have to return the unit for service. • This unit is designed for interior use only. Do not use this unit out doors. Use of product outdoors will void the warranty. • Be sure that the local power outlet match that of the required voltage for your unit. • Do not attempt to operate this unit if the power cord has been frayed or broken. • Always route your power cord out of the way of foot traffic. • Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in the rare case of an internal short. • Disconnect the unit’s main power when left unused for long periods of time. • Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall. • Never block the ventilation holes. • Do not attempt to operate this unit, if it becomes damaged in any way. • Never operate this unit when it’s cover is removed. • This unit is for adult use only. Keep out of the reach of children. Groove Wheel™ Halogen Lamp Warning This fixture is fitted with halogen lamps which are highly susceptible to damage if improperly handled. Never touch lamp with your bare fingers as the oil from your hands will shorten lamp life. Also, never move the fixture until the lamps have had ample time to cool. Remember, lamps are not covered under warranty conditions. ©American DJ Supply® - - Groove Wheel™ Instruction Manual Page 3 Groove Wheel™ Operation Introduction: The Groove Wheel’s oil wheel will rotate slowly making a unique, vibrant psychedelic effect that produces a multi-colored and multi-textured effect. For best results, shine on a light colored wall or ceiling (or any surface). Adjust focusing lens to desired effect. Use an American DJ® high quality mobile pro fog machine. Operating Instructions: This unit has been fitted with a lamp at the factory and is ready to go. Plug the unit into a matching power outlet. Motor rotation will start when unit is plugged in. For best results, shine on a light colored wall or ceiling (or any surface). Adjust focusing lens to desired effect. Use an American DJ® high quality mobile pro fog machine or other special effects smoke to enhance the beams. This will make the colored beams of light more visible and enhance the overall effect. Mounting: When used with included mounting bracket, this unit may be mounted in any safe position or set on a flat stable surface. Caution! Be sure not to obstruct cooling vents and keep this unit in a well ventilated area. Never open the unit while in use. Avoid touching the lamps, the lamp will get extremely hot under normal usage and may cause serious injury. Groove Wheel™ Cleaning Due to fog residue, smoke, and dust, cleaning the internal and external optical lenses must be carried out periodically to optimize light output. 1. Use normal glass cleaner and a soft cloth to wipe down the outside casing. 2. Use a brush to wipe down the fan grill. 3. Clean the external optics with glass cleaner and a soft cloth every 20 days. Situation may very. If used heavily in clubs with lots of fog, cleaning may be required more often. 4. Clean the internal optics with glass cleaner and a soft cloth every 30-60 days. 5. Always be sure to dry all parts completely before plugging the unit in. Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue, dust, dew). Proper cleaning may extend the life of your unit drastically ©American DJ Supply® - - Groove Wheel™ Instruction Manual Page 4 Groove Wheel™ Warranty Registration The Groove Wheel™ carries a 90 day limited warranty....