It’s an allrounder with so many features that you hardly need any other equipment. Use it as a guitar combo to deliver 2 x 60 Watts stereo with internal or external loudspeakers. However you use your V-AMPIRE, you will always profit from its enormous flexibility. So enough talk: Nothing will convince you more than what you actually hear and feel when you play your V-AMPIRE. But ... 1.1 ... before you get started Your V-AMPIRE was carefully packed at the assembly plant to assure secure trans

Please take the time to fill in and return the warranty card within 14 days after the date of purchase, so as to benefit from our extended warranty. Or register online at ( You find the serial number of the V-AMP 2 on the base of the casing. [321 FUSE HOLDER/VOLTAGE SELECTOR (V-AMPIRE/ V-AMP PRO only). Before connecting the unit to the mains, make sure that the voltage setting matches your local voltage. A blown fuse should only be replaced by a fuse of the same type and rating. On some units,

Please take the time to fill in and return the warranty card within 14 days after the date of purchase, so as to benefit from our extended warranty. Or register online at 2. CONTROL ELEMENTS On the added view sheet you will find the corresponding illustrations for all control elements. The numbering of most of the control elements is the same for all three products. Because of the different design and some varying elements, the numbering is not always consistent. We therefore marked those diff

before you get started.............................................S 1.1.1 Serial number.....................................................S 2. CONTROL ELEMENTS...............................................S 2.1 Front panel/surface......................................................S 2.2 Rear panel/side.............................................................7 3. OPERATING MODES AND APPLICATIONS................8 3.1 Selecting an operating mode in CONFIGURATION mode................

Connections................................................................7 2.1 Rear panel connectors ......................................................7 3. Initial operation..........................................................8 4. Shipment.....................................................................8 5. Online Registration....................................................8 6. Specifications..............................................................9 Thank you Your purchas

Thanks to its high-performance features you can create state-of-the-art overdrive sounds for almost any application. 1. CONTROLS Top view The LEVEL control adjusts the output level. The TONE control allows you to shape your overall sound. The DRIVE control adjusts the amount of the overdrive/distortion effect. The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator. Use the footswitch to activate/deactivate the effect. Use this 1/4" TS IN connector t

For your convenience the MINI-Gressor II™ has been lamped and is ready to be used, there is no assembly required. Please read the following instructions before installing or operating your new MINI-Gressor II™. Operating Instructions: This unit is ready to be hung or set on a flat surface. This unit requires a sound source to operate. The unit will react to the beat of music via its internal microphone. Be sure not to obstruct the cooling vents. Keep in a well ventilated area. For best results

If you don’t want to use your headphones, you can also connect a pair of active monitors to the PHONES-connector—the BEHRINGER MONITOR SPEAKERS MS16 as well as the DIGITAL MONITOR SPEAKERS MS20 and MS40 are a perfect choice for this application. If you own a mixing console, you can do the following: connect a stereo input of the mixing console to the PHONESconnector and the active monitors to the control room outputs of the mixing console. 4.2 Connection to a guitar amp Fig. 4.2: Connection to a