6. After all the units settings have been set and are plugged in, adjust the sensitivity knob on the bottom of the master unit to make them react to sound. 7. To run a synchronized light show set all the dipswitch on all the fixture to the ‘off’ position. All fixtures will now run in the same exact pattern. 8. You can also use the optional MINI/C Remote Control. If you want to use the optional remote control, connect the MINI/C controller to the first fixture in the line (master). Note: The remo

This bar will begin to flash when a track is ending regardless of which time function you are in. Use the flashing bar as a visual reminder that a track is ending. ©American Audio® - - CK 800Mp3 Instruction Manual Page 21 Pitch adjustments Pitch adjustments: You can activate the PITCH SLIDER (4) by pressing the PITCH ON/OFF BUTTON (5). When the button LED is lit, the PITCH SLIDER is active and the pitch can be adjusted. When the button LED is not lit PITCH SLIDER is not active. The different pit

If the carton appears to be damaged, carefully inspect your mixer for any damage and be sure all equipment necessary to operate the mixer has arrived intact. In case damage has been found or parts are missing, please contact our toll free customer support number for further instructions, please do not return the mixer to your dealer. DV2 USB Introduction Introduction: Congratulations and thank you for purchasing the American Audio® DV2 USB mixer. This mixer is a representation of American Audio’

55ASSIGNCH .............. ASSIGNCH ...................................... RIGHT-15-10-50+5 .................................................... American Audio would like to thank for your purchase of this great product. For those of you that are to impatient to read the entire user manual we have compiled these quick start instructions. We hope that you will at least read through these instructions to familiarize yourself with the basic understanding of the unit. The DX4™ is part of American Aud

90058 Revised 4/05 DX5R™ Contents DX5R™ Contents 2 ELECTRICAL PRECAUTIONS................................................................................................................3 SAFETY PRECAUTIONS........................................................................................................................4 INTRODUCTION....................................................................................................................................5 SET-UP PRECAUTIONS.........

Please write down the numbers here and retain for future reference. Model No._____________________________ Serial No._____________________________ Purchase Notes: Date of Purchase_______________________ Dealer Name__________________________ Dealer Address_________________________ _____________________________________ _____________________________________ Dealer Phone__________________________ WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN, LIQUIDS, OR MOISTURE

4. AUX CONTROLS - The AUX knobs control the signal level that the channel sends to AUX bus. 5. PRE/POST BUTTON - This button determines if the AUX signal is Pre Fader (signal level is not affected by fader position) or Post Fader (signnal level is affected by the fader position). 6. EFX CONTROL - These knobs control the signal levels sent to the EFX bus. The channel signals mixed by this bus have their overall level set by the MASTER EFX SEND control to the EFX jack located on the front top pane

You can use this loop to create dramatic effect in your mixing. This loop has no time limit and you could actually loop the entire length of disc. You create a seamless loop between two continuous points of a disc. f-WT- s4me>Uca# “DO* РпапЬМппншпиш -^ A. ffi’œmoaoatiBQB 1) Press PLAY/PAUSE BUTTON (15) to activate playback mode Figure 19 -^ ааггжляввдв ж s'Baoomoarttk 2) Press the IN BUTTON (12). This will set the starting point of the SEAMLESS LOOP. The IN BUTTON (12)

Pressing the PLAY/PAUSE BUTTON (17) will switch between play and pause modes. When the unit is in pause mode the PAUSE INDICATOR (49) in the LCD DISPLAY (19) will glow. The green PLAY/PAUSE BUTTON (17) LED will also begin to flash repeatedly. 7. FRAME SEARCH This feature allows you to scroll through a track frame by frame, allowing you to find and set a starting cue, sample, or loop point. To use the scroll function you must first be in Pause Mode (see section 5) or Cue Mode (see section 7). Onc

CHANNEL 2: PHONO 2 INPUT/AUX 2 JACKS - The type of input must directly reflect the selected mode of the LINE LEVEL SELECTOR SWITCH (24). Connect turntables equipped with MM pickup cartridge to PHONO inputs (All DJ turntable use MM pick-up cartridges). CD players or Tape Decks and other line level instruments may be connected to these jacks as long as the Line Level Selector Switch (29) is in the “AUX 2” position. The red colored RCA jack represents the right channel input and the white represent