valutazioni - 2, GPA: 4 ( )

Produttore : Campbell Hausfeld File Size : 841.67 kb File Nome : Lingua di insegnamento:

Tank leaks 1. Close tank drain valve 2. Check all connections with soap and water solution. If a leak is detected, tighten. Or remove fitting and apply pipe tape to threads and reassemble. Do not disassemble check valve. With air in tank, bleed tank first. 3. Check entire tank for leaks with soap and water solution. Compressor runs 1. Excessive air usage, compressor too continuously / air small output lower than 2. Open tank drain valve normal 3. Loose connections (fittings, tubing, air hose, any connections, etc.) 4. Pump wore out 1. Decrease usage or purchase unit with higher air delivery (SCFM) 2. Close tank drain valve 3. Check all connections with soap and water solution. If a leak is detected, tighten. Or remove fitting and apply pipe tape to threads and reassemble. 4. Replace pump / motor assembly Excessive moisture in discharge air 1. Excessive water in tank 2. High humidity 1. Drain tank, tilt tank to remove moisture 2. Move to area of less humidity; use air line filter Safety valve pops open 1. Defective pressure switch 2. Defective safety valve 1. Replace pressure switch 2. Replace safety valve with genuine replacement part 6 FP209501, FP209598, FP209599, FP209601, FP209699DB, and FP209699DQ For Replacement Parts or Please provide following information: Address parts correspondence to: -Model number Attn: Customer Service Technical Assistance, - Serial number (if any) 100 Production Drive -Part description and number as Harrison, OH 45030 U.S.A. Call 1-800-543-6400 shown in parts list 1 2 7 24 9 10 12 13 17 18 19 22 20 14 3 11 16 5 6A 6 4 21 25 23 8 26 27 28 32 31 29 15 30 33 30 Ref. Ref. No. Description Part Number Qty. No. Description Part Number Qty. Replacement Parts List 34 35 31 1 Shroud . 1 22 Accessories FP204008AV 1 2 Shroud insert . 1 23 25' Recoil Hose MP268100AV 1 3 4 On/off switch M3x15 screw FP204824AV . 1 4 24 25 Plastic base Pressure switch tube kit ^ FP209535AV 1 1 5 Manifold assembly FP209527AV 1 26 Cap (see part #10) 1 6 2 in. Diameter gauge FP209529AV 1 27 Spring (see part #10) 1 6A 1.5 in. Diameter gauge FP209528AV 1 28 Tank — 1 7 Safety valve V-215102AV 1 29 Screw Ў 2 8 Motor isolator bushing kit FP209037AV 1 30 Washer Ў 2 9 Pressure switch FP209530AV 1 31 Screw Ў 4 10 Check valve (includes 26 and 27) FP209532AV 1 32 Nut Ў 4 11 M4x0.7x6 screw . 1 33 Screw Ў 4 12 13 M6x1.0x10 screw Drain valve Ў D-1403 4 1 34 35 Wire Clip Screw FP202823AV . 1 1 14 Rubber feet (tank) FP209522AV 4 36 Decal kit (not shown) 15 Wire (pressure switch to Model FP209501 FP209537AV power switch) FP209523AV 1 Model FP209601 FP209620AV 16 Power cord/ strain relief FP209534AV 1 REPAIR PART KITS 17 M3x10 screw . 6 Ў Fastener Kit FP209040AV 18 Pump/motor assembly FP209039AV 1 . Shroud kit FP209536AV (Includes part #20) ^ Plastic base & Motor cover FP209038AV 19 Motor cover ^ 1 . Standard hardware item 20 Exhaust tube kit FP202839AV 1 — Not Available 21 Nailer hook FP209521AV 1 7 Oilless Compressors Limited Warranty 1. DURATION: From the date of purchase by the original purchaser as follows: One Year. 2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Telephone: (800) 543-6400 3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the Campbell Hausfeld compressor. 4. WHAT PRODUCTS ARE COVERED BY THIS WARRANTY: Any Campbell Hausfeld air compressor. 5. WHAT IS COVERED UNDER THIS WARRANTY: Substantial defects due to material and workmanship with the exceptions noted below. 6. WHAT IS NOT COVERED UNDER THIS WARRANTY: A. Implied warranties, including those of merchantability and FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED FROM THE DATE OF ORIGINAL PURCHASE AS STATED IN THE DURATION. If this compressor is used for commercial, industrial or rental purposes, the warranty will apply for ninety (90) days from the date of purchase. Extreme Duty Contractor Compressors are not limited to a ninety (90) day warranty when used in contractor applications. Four cylinder single- stage and two-stage compressors are not limited to a ninety (90) day warranty when used in commercial or industrial applications. Some States...

Scarica la tua

Per scaricare, digitare 2 cifre :