valutazioni - 4, GPA: 4.3
(
)
)
|
Facilità d'uso
Condenser Polar Pattern........................................Continuously-variable Frequency Response ....................................... 90Hz -17KHz Sensitivity .........................................-32dBV (25mV) @ 1 Pa Impedance.............................................................120 ohms Maximum SPL.................................120dB, 1% T.H.D., 1KHz Self Noise ...................................................................18dBA Power Requirements............................P12, P24, P48, 4mA Connector...................................................3-pin XLRM-type Polarity................................ Positive pressure on diaphragm corresponds to positive voltage on pin 2 relative to pin 3 at XLR3M-type connector. Finish ......................................Durable matte-black urethane or white (220VPW) Dimensions .....................................................(See drawing) Net Weight [Mass] ......................................... 3.9oz [0.11Kg] Packaged Weight [Mass] ...............................5.0oz [0.14Kg] RF Immunity......................... Meets or exceeds EN55103-2, E1, E2, E3 and E4 RoHS Compliant †Specifications subject to change without notice. Included Accessories ..............................2 rubber bushings, hex nut and washer Cardioid Figure-of-eight Architects’ and Engineers’ Specifications The microphone will be an inconspicuous, continuously- variable polar pattern, button-style, condenser boundary microphone designed for surface installation. The microphone will have a continuously-variable polar pattern. The sensitivity of the microphone will be –32dBV (25mv) @ 1Pa. The frequency response will be 90Hz-17KHz. The impedance of the microphone will be 120 ohms. The self- noise will be 24dBA. The maximum SPL will be 120dB. The microphone will include an integral 80Hz, 12dB/octave high-pass filter to improve intelligibility. The microphone will have a 3-pin XLRM-type connector allowing for bottom exit. The microphone will operate from P12, P24 or P48 standard phantom power consuming 4mA. The microphone element and electronics will be enclosed in a radio frequency resistant housing meeting or exceeding EN55103-2. The 220VP will be 3-3/8" [85mm] long, 1-1/8" [28mm] in diameter and stands 3/4" [20mm] above boundary. The net weight [mass] will be 3.9oz [0.11Kg]. The packaged weight [mass] will be 5.0oz [0.14Kg]. The 220VP will have durable matte-black urethane or matte-white finish. The Astatic model 220VP or 220VPW is specified. Two-Year Limited Warranty Astatic Commercial Audio Products hereby warrants that this product will be free of defects in material and workmanship for a period of two years from the date of purchase. In the unlikely event that a defect occurs Astatic will, at its option, either repair or replace with a new unit of equal or greater value. Retain proof of purchase to validate the purchase date and return it with any warranty claim. This warranty excludes exterior fini...
Questo manuale è adatto anche per i modelli :Cuffie e microfoni - 220VP (789.99 kb)