valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
• Other types of rechargeable or alkaline batteries cannot be charged with this system. • AAA alkaline batteries can be used to operate the headphones. • Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Attention should be drawn to the environmental aspects of battery disposal. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Notice for the European Union Hereby, Philips Consumer Lifestyle, BU Communications, Headphones & Accessories, declares that this Philips digital wireless headset SHD9000 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This product has been designed, tested and manufactured according to the European R&TTE Directive 1999/5/EC. EN 2 What's in the box (Fig. A) 1) Headphones 2) Docking station 3) AC/DC adaptor 5V 300mA 4) RCA to RCA cable 5) 2 x AAA rechargeable NiMH batteries 6) Quick start guide start guide EN 3 Get Started Note ••Before using the headphones for the first time, charge the supplied batteries for at least eight hours. Only rechargeable NiMH batteries can be charged. Use the batteries (capacity over 700mAh) to ensure the 20 hours' operating time from fully charged. ••AAA alkaline batteries can be used to operate the headphones. ••Use Philips power adaptor only. ••If no audio input for over five minutes, the transmitter automatically turns to standby. ••The docking station does not transmit audio signal during charge. 1 Install/Replace supplied batteries (Fig.B). 2 Power on the transmitter (Fig.C). 3 Power off the headphones and charge the headphones (Fig.D). 4 Connect audio and adjust ATT (Attenuation of audio input signal) (Fig.E). • For portable CD player, MP3 player or other devices with 3.5mm triport socket output, switch ATT to 0dB. • For HiFi, TV, DVD player or other devices with RCA socket output, switch ATT to -8dB. 5 Power on the headphones (Fig.F). 6 Adjust the volume (Fig.G). EN 4 LED indications Situation Transmitter Headphones LED Blue Green Green Connection established Blinking --- Blinking Charging Off Blinking Off Charging (100% full) Off On Off Battery low --- --- Double blinking Non NiMH batteries --- Off --- Searching Fast blinking --- Fast blinking EN 5 Sound indications Situation Sound signal Low battery One “Beep” per 10 seconds Turn the volume to maximum/minimum level Alert tone “Beep” EN 6 Product information Transmitter System Radio Frequency (RF) Modulation MSK digital Carrier Frequency 2400 M - 2483.5 MHz Channels 15 (auto-switching) Radiated Output Power 30 mW Effective Transmission Range Approx. 100 meters (depending on ambient conditions) Input Level 800 mV (0 dB); 2 V (-8 dB) Power requirements DC 5 V (from the supplied AC power adaptor) Headphone Playback frequency range 17 - 23,000 Hz S/N Ratio 88 dB Nominal Distortion 0.5% THD Channel Separation 60 dB Power Requirements Rechargeable NiMH batteries (supplied) or commercially available (AAA) dry batteries Operating time ~ up to 20 hours (actual result may vary) EN 7 Adaptor specification Region Adaptor type number Input voltage Output voltage Input frequency Europe (except U.K.) YLS0051A-E050030 100-240V~ 5V , 300mA 50/60Hz S003IV0500030 100-240V~ 5V , 300mA 50/60Hz U.K./H.K. YLS0051A-U050030 100-240V~ 5V , 300mA 50/60Hz S003IB0500030 100-240V~ 5V , 300mA 50/60Hz EN 8 Frequently asked questions (FAQ) 1. Headphones fail to charge. Possilbe cause Solution No battery installed or wrongly installed. Install or replace batteries properly (Fig.B). No power supply to transmitter. Make sure that the ...