|
Facilità d'uso
Get the best fit 1 Choose the earbuds that best fit for your ear canal. 2 Gently blend the ear hook to fit into your ears. 3 Adjust the rubber par t of the ear hook to the height that you feel fit. 4 Twist the earbuds to the right position for best fit and noise isolation. Operate the headset Enter pairing mode Ensure the headset is off. Press until LED star ts blinking red/blue alternately. Check battery When first use: Hold for 2 seconds. During operation: Hold VOL + and VOL -simultaneously. >50%: 1 blue flash >25%: 2 red flash <25%: 3 red flash Turn headset on/off Hold until LED turns on/off. Play/Pause music Tap Stop music Hold Next / Previous track Tap / Adjust volume Press VOL +/VOL Pick up / End a call Tap Reject a call Hold Redial the last number Press twice quickly. Activate voice dialing* Hold until beep occurs. Mute/Unmute the Mic Double tap during a call. Transfer a call to a Hold during a call. mobile phone * Available if suppor ted by your mobile phone. Manage 3-way calls If your mobile phone and network operator suppor t 3-way-calls, you can manage 3-way-calls via the headset. To hold the active call and Press while the 2nd call is accept a waiting call coming in. To drop the active call and Hold while the 2nd call is accept a waiting call coming in. To swap a call Press during a call. LED and sound indication The red/blue LED flashes alternately. The headset is ready for pairing. The blue LED flashes once ever y 6 The headset is connected seconds. to the device. The blue LED flashes twice every 3 The headset is not seconds. connected. The blue LED flashes once ever y half There is an incoming/ a second. outgoing call. The blue LED flashes once ever y The headset is active on second. a call. The red LED flashes three times and The battery is low in beeps twice every minute. power. Solid red LED. The headset is charging. The LED is off. The headset is off./Charging is finished. The headset beeps ever y 5 seconds. The Mic is muted. Clean the headset A few ways to clean the headset: • Wipe with clean cloth. • Wash it under running tape water. Caution • Do not dive with this product or immerse it into water. English EN 7 5 Technical data • Up to 4.5 hours of playtime or 5 hours of talk time • Up to 120 hours of standby time • Typical time for a full charge: 2 hours • Rechargeable Lithium-Polymer battery (105 mAh) • Bluetooth 2.1, Bluetooth stereo suppor t (A2DP-Advanced Audio Distribution Profile, AVRCP-Audio/Video Remote Control Proflie), Bluetooth mono suppor t (HSP-Headset Profile, HFP-Hands-Free Profile) • Acoustic echo cancelation • Dual mic noise suppression • Adjustable ear hook • Noise isolating in-ear design • Operating range up to 10 meters (33 feet) • 3 sizes of ear caps included • Quick-dr y pouch included • Sweat proof and fully washable Specifications are subject to change without notice. 8 EN 6 Frequently asked questions English Bluetooth headset does not switch on. • Batter y is low. » Charge the headset. No connection to a mobile phone. • Bluetooth disabled. » Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headset. Pairing does not work. • The headset is not in pairing mode. » Follow the steps described in this user manual. » Ensure that you see the LED light flashes red and blue alternately before you release the button. Do not stop pressing the button after seeing the blue LED only. The mobile phone cannot find the headset. • The headset may be connected to another previously paired device. » Turn the currently connected device off or move it out of range. • Pairings may have been reset or headset has been previously paired with other device. » Pair the headset with the mobile phone again as described in the user manual. Voice dialing or redialing does not work. • Your mobile phone may not support this feature. The other side cannot hear me, and I hear a beep noise every couple of seconds. • The microphone is muted. »Quickly press twice to enable the microphone. Audio quality is poor and crackling noises can be heard. • Bluetooth audio source is out of range. » Reduce the distance between the headset and the Bluetooth audio source, or remove obstacles between them. • The earbud is not positioned correctly. » Ensure that you position the earbud as described in this user manual and adjust the ear hook to the best fit of your ears. I hear but cannot control the music on my device (e.g. skip forward/backward). • Bluetooth audio source does not suppor t AVRCP. » Check the user manual of your audio source. Please visit for additional support. EN 9 Philips Consumer Lifestyle AQ95-56F-1300KR 2011 ........................................................ ........................................................................... (Report No. / Numero du Rapport) (Year in which the CE mark is affixed / Annee au cours de laquelle le marquage CE a ete appose) EC DECLARATION OF CONFORMITY (DECLARATION DE CONFORMITE...
Questo manuale è adatto anche per i modelli :Cuffie - SHB6017/28 (651.25 kb)