valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
ENGLISH Over view of your Bluetooth stereo headset and USB Bluetooth music / voice adapter Bluetooth stereo headset VOL – VOL + MicrophoneCharging socketLED indicator lightOptiFit ear loopadjustment Bluetooth music / voice adapter LED, Pair & Connect button 6 Install and configure the USB Bluetooth music / voice adapter No separate software is required to install the Bluetooth music / voice adapter as it is pre- installed on the adapter. Locate a free USB port on your computer and insert the Bluetooth music / voice adapter. Windows will recognize it and display that if found new hardware. If you are prompted for a device driver, please select “Install the software automatically” and restart your PC if required. Windows will install the Bluetooth music/voice adapter by default as your “Windows preferred audio device” everytime you plug the adapter into your USB port. This means that your music will be streamed via the Bluetooth music / voice adapter to your Bluetooth headset and not to your speakers or another previously installed audio device on your PC. Also the Bluetooth headsets microphone will be used for recordings. If you do not want the USB music / voice adapter to be your “Windows preferred audio device”: 1 Open the window for your PC’s “Sounds and Multimedia properties”.You can find this window by following this menu path: Start ‡Settings ‡Control Panel ‡Sounds and Multimedia Click on the “Audio Tab” and select the “Sound Playback” and “Sound Recording” device, that you prefer to use (instead of the Philips SHB6111 Bluetooth music / voice adapter). Confirm your selection by clicking “o.k.” If you want to restore the original settings access the same menu and replace the entries in the “Sound Playback” and “Sound Recording” fields with “Philips SHB6111 Bluetooth music / voice adapter”. Alternatively you can unplug the Bluetooth music / voice adapter and plug it into the USB port again to achieve the same effect. Configure Skype or other VoIP applications to use the Bluetooth music / voice adapter: To make sure Skype uses the headset 1 Open Skype. Go toTools Options General Audio Settings and select “Philips SHB6111 Bluetooth music / voice adapter” as the “Microphone” and the “Ringing” device. (In Windows versions lower than Windows XP select “USB Audio Device” if “Philips SHB6111 Bluetooth music / voice adapter” cannot be selected). If you use a VoIP application other than Skype, make sure the corresponding settings are set correctly. Please refer to the programs user manual for more detailed information. Configure Windows Media Player or other music player applications to use the Bluetooth music / voice adapter: To ensure that Windows Media Player uses the headset 1 Open Windows Media Player. Go to Tools ‡Options ‡Devices and select the “speakers” entry. In the speaker properties choose “Philips SHB6111 Bluetooth music / voice adapter” as the sound playback device. (In Windows versions older than Windows XP select “USB Audio Device” if “Philips SHB6111 Bluetooth music / voice adapter” cannot be selected). If you use a music player other than Windows Media Player, make sure the corresponding settings are set correctly. Please refer to the programs user manual for more detailed information. ENGLISH Get star ted 7.1 Charge your headset Before you use your headset for the first time, charge the battery for 6 hours for optimum battery capacity and lifetime. Warning Use only the original USB charging cable. Using another charger may damage or destroy your headset. Plug the USB charging cable into your computers USB socket and connect the charger cable to the headsets charging socket. Caution Finish your call before charging the headset, as connecting the headset for charging will cut an ongoing call. During recharging the LED indicator will show a red light.The LED will turn off once charging is complete.Typically a full charge will take four hours.You can operate the headset during charging. Tip You can save energy and protect the environment by unplugging the charger after charging is complete. 7.2 Pair your headset Your Bluetooth stereo headset must be paired to your Bluetooth adapter and mobile phone before connecting and using it with that device for the first time. “Pairing” will establish a unique encrypted link between your headset and USB adapter or mobile phone. Pairing has to be done • before using your headset with your USB adapter or mobile phone for the very first time, or • after pairing more than two Bluetooth devices with your headset Your headset can store up to two paired devices in its memory, if you pair more than two devices the oldest paired device is overwritten. • “Pairing” is different from “connecting” as pairing typically only has to be done once, whereas the phone and headset need to “connect” every time one of the two devices was turned off or out of range. 7.2.1 Pair your headset with your PC To pair your headset with your PC, make sure the headset is charged and turned off...