valutazioni - 4, GPA: 4
(
)
)
|
Facilità d'uso
(.. “Chapter 4: SD Memory Card Security Function” in onscreen Reference Manual) NOTE • When the Setup Utility is started up with the User Password: • [Clear registered SD card], [Set Supervisor Password] and [Hard Disk Lock] will not be displayed • [Password on boot], [SD Startup], [SD Setting Method], [Setup Utility Prompt], [Boot First Menu] and [User Password Protection] will be displayed, but cannot be set • The User Password can be changed only when [User Password Protection] has been set to [No Protection]. The User Password cannot be deleted ..Parameters (An underline indicates the factory default settings) Password on boot • Select whether you will need to input ([Enable]) or not ([Disable]) the Supervisor Password or the User Password on booting Disable Enable SD Startup*2 • Select whether to use an SD memory card instead of entering the password on booting ([Enable]) or not ([Disable]) Disable Enable SD Setting Method*2 • Select whether to set an SD memory card to [Leave Set] or [Set and Eject] when an SD memory card is used instead of entering the password • This can be set only if [SD Startup] has been set to [Enable] Leave Set Set and Eject Clear registered SD card • Clear the registration from all registered SD memory cards not to be used instead of entering the password on booting To the sub-menu Set Supervisor Password • Set a Supervisor Password if you wish to prevent any unauthorized changes to the Setup Utility settings, also if you require a password on boot, set [Password on boot] to [Enable] after you set Supervisor Password To the sub-menu *2 [SD Startup] and [SD Setting Method] cannot be set if [Password on boot] is set to [Disable]. Setup Utility Prompt • Select whether to display ([Enable]) or not to display ([Disable]) the message “Press F2 for Setup/F12 for LAN” shown on the bottom of the [Panasonic] boot screen that is displayed after starting this computer Disable Enable Boot First Menu • Select whether to display “Boot Menu” ([Enable]) or not ([Disable]) Disable Enable Hard Disk Lock • Select whether enable ([Enable]) or disable ([Disable]) the hard disk lock • This function will not work without the Supervisor Password being set Disable Enable User Password Protection • Select whether to permit changing the User Password ([Protected]) or not ([No Protection]) No Protection Protected Set User Password • Set User Password when more than one person will use this computer, etc. For example, when the system administrator sets Supervisor Password and User Password and lets other users know only the User Password, other users cannot change some of the settings in Setup Utility • This function will not work without the Supervisor Password being set To the sub-menu Boot Menu Set priorities (displayed in order from top to bottom) for devices that start up the operating system. To move a device up by one in the order, select the device with the .. key and the • key, and then press the F6 key. To move a device down by one in the order, select the device with the .. key and the • key, and then press the F5 key. • Panasonic USB floppy disk drive (CF-VFDU03 (optional)) can be used for startup (recommended) Floppy Drive Hard Disk Drive CD/DVD Drive LAN*1 *1 This is not displayed when [LAN] or [Boot up from LAN] is set to [Disable] on the [Advanced] menu. NOTE • The [Boot] menu cannot be changed when the Setup Utility is started up with the User Password • Boot Menu The device for starting up the operating system can also be selected during computer start-up. After the computer is turned on and the Esc key is pressed at [Panasonic] boot screen, [Boot Menu] (the device selection screen) will appear. When the [Boot] menu setting is changed, the selection screen display Getting Setup Utility will also change. [Boot Menu] is displayed only when [Boot First Menu] in the [Security] menu is set to [Enable] Getting Started Exit Menu Save Values & Exit Exit Without Saving Changes Get Default Values*1 Load Previous Values Save Current Values Battery Recalibration *1 This item is not displayed when starting up the Setup Utility with the User Password. ..Parameters Save Values & Exit Exit the Setup Utility and save your changes to CMOS. Exit Without Saving Changes Exit the Setup Utility without saving your changes to CMOS. Get Default Values Set the Setup Utility to the default settings. Load Previous Values Load previous values from CMOS for all Setup items. Save Current Values Save your changes to CMOS. Battery Recalibration To accurately display remaining battery capacity, fully charge the battery pack, then fully discharge it. (.. “Chapter 2: Battery Power” in onscreen Reference Manual) 37 Useful Information Operation Usage / Handling / Maintenance .. Place the computer on a flat stable surface. Do not place the computer to tip over. When the computer receives extremely strong shock after disk may become inoperable. .. Operation: Temperature: 5°C to 35°C {41°F to 95°F} Humidity: 30% to 80% RH (No con...