valutazioni - 7, GPA: 4.3
(
)
)
|
Facilità d'uso
When using battery power, you should be aware that the computer will automatically enter Hibernate mode if the remaining battery life becomes short, regardless of the power management setting you select. ! If the battery charge level falls below 10%, you should either connect the AC adapter to recharge the battery pack or shut down your computer and install a fully charged battery pack. Using Normal Mode This is the normal state of your computer when it is in use. The green power indicator light is lit in this mode. Customizing Your VAIO Computer > Using the Power Saving Modes n 75 N Using Standby Mode Standby mode turns off the LCD screen and places the built-in storage device(s) and the CPU into a low power consumption mode. The orange power indicator light blinks slowly in this mode. ! If you do not intend to use your computer for a long period of time while it is disconnected from AC power, place the computer into Hibernate mode or turn it off. To activate Standby mode 1 Click Start and then Turn Off Computer. 2 Click Stand By. . Your computer comes out of Standby mode quicker than out of Hibernate mode. Standby mode uses more power than Hibernate mode. ! If the battery runs out of power while your computer is in Standby mode, you will lose all unsaved data. Going back to the previous work state is impossible. To avoid loss of data, you should save your data frequently. Customizing Your VAIO Computer > Using the Power Saving Modes n 76 N To return to Normal mode . Press any key. . Slide the power switch (in the direction of G on the switch). ! If you slide (in the direction of G on the switch) and hold the power switch for more than four seconds, your computer will turn off automatically. You will lose all unsaved data. . You can use the VAIO Control Center to configure your computer to return to Normal mode when you open the LCD screen lid. This power resuming preference will be lost if you remove both the AC adapter and the battery pack. If the computer is not used for a certain period of time, it will enter Standby mode. To modify this, you can change the Standby mode settings. To change the Standby mode settings 1 Click Start and then Control Panel. 2 Click Performance and Maintenance. 3 Click Power Options. The Power Options Properties window appears. 4 Select the Power Schemes tab. 5 Change the System Standby settings. Customizing Your VAIO Computer > Using the Power Saving Modes n 77 N Using Hibernate Mode In Hibernate mode, the state of the system is saved on the built-in storage device(s) and power is turned off. Even when the battery runs out of power, no data will be lost. The power indicator light is unlit in this mode. . If you do not intend to use your computer for a long period of time, place the computer into Hibernate mode. To activate Hibernate mode Press the Fn+F12 keys. The computer enters Hibernate mode. Alternatively, you can follow these steps to place the computer into Hibernate mode. 1 Click Start and then Turn Off Computer. 2 Click Hibernate. . Hibernate mode requires more time than Standby mode to be activated. Hibernate mode uses less power than Standby mode. ! Do not move your computer before its power indicator light turns off. Customizing Your VAIO Computer > Using the Power Saving Modes n 78 N To return to Normal mode Slide the power switch (in the direction of G on the switch). The computer returns to its normal state. ! If you slide (in the direction of G on the switch) and hold the power switch for more than four seconds, your computer will turn off automatically. . It takes more time to return to Normal mode from Hibernate mode than from Standby mode. You can use the VAIO Control Center to configure your computer to return to Normal mode when you open the LCD screen lid. This power resuming preference will be lost if you remove both the AC adapter and the battery pack. Customizing Your VAIO Computer > Using the VAIO Power Management n 79 N Using the VAIO Power Management Power management helps you set up power plans for running on AC or battery power to suit your requirements for power consumption. The VAIO Power Management is a software application developed exclusively for VAIO computers. With this software application, you can enhance the Windows power management functions to ensure better operation of your computer and longer battery life. See the help file included with the software for more information. Activating the VAIO Power Management The VAIO Power Management functions are added to the Windows Power Options Properties. To activate the VAIO Power Management 1 Click Start and then Control Panel. 2 Click Performance and Maintenance. 3 Click Power Options. The Power Options Properties window appears. 4 Select the VAIO Power Management tab. To restore the default settings 1 On the VAIO Power Management tab, click Advanced. The VAIO Power Management window appears. 2 Follow the on-screen instructions to change the settings. Customizing Your VAIO Computer > Using...
Questo manuale è adatto anche per i modelli :Notebook - VPCW11S1E_P (1.61 mb)
Notebook - VPCW11S1E_T (1.61 mb)
Notebook - VPCW11S1E_W (1.61 mb)
Notebook - VPCW11S1R_T (1.61 mb)