valutazioni - 3, GPA: 3.3 ( )

Produttore : Toshiba File Size : 3.31 mb File Nome : Lingua di insegnamento:

1 Follow steps 1 through 6 in “Installing additional memory (optional)” on page 46. CAUTIONS: Do not try to remove a memory module with the computer turned on. You can damage the computer and the device. Do not remove the memory module while the computer is in Standby mode. The computer could hang up the next time you turn it on and data in memory will be lost. In either of the above cases, the Standby configuration will not be saved. The following message appears when you turn on the power: Warning: Resume Failure Press Any Key To Continue If the computer hangs up when you turn it on, perform the following: Press the power button and hold it down for five seconds, then turn the power on again. 2 Push the latches to the outside to release the module. A spring will force one end of the module up. 52 52 52 Installing additional memory (optional) Removing the memory module 3 Gently pull the module out. CAUTION: Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. 4 Complete the procedure by following steps 10 through 12 in “Installing additional memory (optional)” on page 46. Checking total memory When you add or remove memory, you can check that the computer has recognized the change. To do this: 1 Click Start, Control Panel 2 Click Performance and Maintenance. 3 Click System. 4 The General tab view automatically appears and shows the recognized memory. 5 If the computer does not recognize the memory configuration, turn off the computer, remove the memory slot cover, and make sure the memory module is seated Getting Started Getting Started Connecting a mouse properly, as described in steps 8 and 9 of “Installing additional memory (optional)” on page 46. Connecting a mouse You may want to use a mouse instead of the TouchPad, the computer’s built-in pointing device. To connect a mouse, plug the mouse cable into one of the computer’s USB ports. You can connect it after you turn on the computer. The operating system automatically detects the mouse. The mouse and TouchPad can be used at the same time. Connecting a printer You can connect a USB-compatible printer to your computer through the USB ports. You can connect a USB printer after you turn on the computer. Alternatively, you can connect a parallel printer to the computer’s parallel port. Connecting a USB printer To achieve the connection, you need a suitable USB cable, which may come with your printer. Otherwise, you can purchase one from a computer or electronics store. NOTE: Follow the manufacturer’s instructions for connecting a USB printer to your computer. Connecting a parallel printer To achieve the connection, you need a suitable cable, which may come with your parallel printer. Otherwise, you can purchase one from a computer or electronics store. 54 54 54d Using external display devices Connect a parallel printer before you turn on the computer. NOTE: F...

Scarica la tua

Per scaricare, digitare 2 cifre :