valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
To double- click, press the primary button twice in rapid succession. The function of the secondary button depends on the program you are using. It usually corresponds to the right mouse button. Check your program’s documentation to find whether it uses the secondary mouse button. Getting Started Getting Started Adding Memory (optional) Disabling or enabling the TouchPad The TouchPad is enabled by default. To change the enable/ disable TouchPad setting: 1 Click Start, Control Panel. The Control Panel window appears. 2 Click Printers and Other Hardware. 3 Click Mouse or press the Fn + F9 hot keys. The Mouse Properties window appears. 4 Click the TouchPAD ON/OFF tab. The TouchPAD ON/OFF tab view window appears. 5 Select Disable or Enable, whichever is appropriate. 6 Click Apply. 7 Click OK. The Mouse Properties window closes. 8 Close the Printers and Other Hardware window. 9 Close the Control Panel window. The Fn + F9 shortcut can be used to enable or disable the NOTE TouchPad (see “Hot Keys” on page 202). Customizing your computer’s settings There are several ways in which you can customize your computer to suit your particular requirements. Refer to your operating system documentation or Help and Support for details. You may also wish to customize your power usage settings. For more information, see “Turning off the display 68 68 68d Powering off the computer automatically” on page 118. There are additional custom settings you can choose. See “Toshiba Utilities” on page 152. Powering off the computer It’s a good idea to power off your computer when you are not using it for a while. If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is off) to fully charge the main battery. With the computer off, it may take up to six hours to charge the main battery. Guidelines for powering off the computer: . If you have work in progress and aren’t connected to a network, use the Hibernate command to save your system settings to the hard disk so that, when you turn on the computer again, you automatically return to where you left off. . To leave the computer off for a longer period, power down the computer. The Windows® XP Professional operating system uses the Shut down command to power down the computer if you are connected to a Windows® network server (domain server) or the Turn Off command if you are not. . When the hard disk drive light on the system indicator panel is on, do not turn off the power. Doing so may damage your hard disk. For more information, see “Powering off the computer” on page 68. Getting Started Getting Started Caring for your computer Closing the display panel When you are finished using the computer, power off and close the display panel to keep dust and dirt out of the computer. If you close the display panel while the computer is still on, one of these actions will occur: . If you have the audible warning set, the computer will beep to notify you that it is still on. (See “Toshiba Hardware Setup” on page 164.) . If you have an action feature set, the computer will perform that action (Nothing, Standby, Hibernate). For more information, see “Power Management” on page 161. Different ways to turn the computer on and off Pressing the power button is not the only way to turn on and off the computer. Alternatives include: . Using Hot Key combinations . Opening and closing the display panel For more information, see “Using Hibernation” on page 98 and “Using Standby” on page 102. Caring for your computer This section gives tips on cleaning and moving your computer. For information about taking care of your computer’s main battery, see “Safety precautions” on page 122. 70 70 70d Caring for your computer Cleaning the computer Keep liquid, including cleaning fluid, out of the computer’s keyboard, speaker grille and other openings. Never spray cleaner directly onto the computer. Never use harsh or caustic chemical products to clean the computer. To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your network administrator for suggestions for appropriate cleaning products. Moving the computer Before moving your computer, even across the room, make sure all disk activity has ended (the drive-in-use light stops glowing) and all external peripheral cables are disconnected. Using a computer lock You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional PORT-Noteworthy® computer lock cable. Sample PORT-Noteworthy computer lock cable To secure the computer: 1 Loop the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. Getting Started Getting Started Caring for your computer 2 Pass the locking end through the loop. 3 Insert the cable’s locking end into the security lock slot on your computer, then engage the locking device. The comp...
Questo manuale è adatto anche per i modelli :Notebook - R100 (2.33 mb)