Log:
valutazioni - 3, GPA: 4.3 ( )

Istruzioni per l'uso Toshiba, Modello libretto U105

Produttore : Toshiba
File Size : 3.57 mb
File Nome :
Lingua di insegnamento:
Vai a scaricare



Facilità d'uso


68 68 68 libretto® DVD Dock 2 Place your computer on top of the libretto® DVD Dock lining up the connecting port on the computer with the the alignment pin on the libretto® DVD Dock. Sample of connecting the computer to the libretto® DVD Dock 3 Push the two docking latches into the locked position. Removing the libretto® DVD Dock To remove the libretto® DVD Dock: 1 Slide the Undock switch on the right side of the libretto® DVD Dock. 2 Release the libretto® DVD Dock’s latches at the back of the computer. Getting Started Getting Started Using external display devices 3 Remove the computer from the libretto® DVD Dock. Sample of removing the computer from the libretto® DVD Dock Using external display devices Your computer comes with a built-in LCD display, but you can also connect an external display device to the available video port: . An external monitor or projector via the RGB (monitor) port. Before connecting an external monitor or video projector, configure your computer for the type of device you are connecting. To do this, refer to the documentation for your operating system and devices. Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this: 1 Connect the monitor’s video cable to the RGB (monitor) adapter, then connect the other end of the adapter to the Toshiba Mini RGB Adapter port on the left side of the computer. 70 70 70d Using external display devices Sample connecting the Toshiba Mini RGB Adapter to the RGB (monitor) adapter port 2 Connect the device’s power cable to a live electrical outlet. 3 Turn on the external device. 4 Set the display mode by pressing Fn + F5, or by configuring the Display Properties settings. Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key (Fn + F5): 1 Press Fn and F5 simultaneously. 2 While holding down Fn, press F5 repeatedly until the setting you want takes effect. Briefly pause between pressing the F5 key to allow time for the display to change. This hot key cycles through the settings in the following order: . Built-in display only . Built-in display and external monitor simultaneously . External monitor only Getting Started Getting Started Using an external keyboard 3 Release the Fn key. TECHNICAL NOTE: You can also change these settings using the Display Properties Box. Set the option for the video controller by clicking Start, Control Panel, Appearance and Themes, and then Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor...

Questo manuale è adatto anche per i modelli :
Notebook - libretto U100 (3.57 mb)
Notebook - libretto U100-S213 (3.57 mb)
Notebook - U100 (3.57 mb)
Notebook - U100-S213 (3.57 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie