valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
Description of the appliance Appliance (Fig. A) 1 Cutting head 2 Suspension loop 3 On/Off switch 4 Adjusting lever Trimming guides and accessories (Fig. B) 1/8“ (3 mm Cutting length) 1/4“ (6 mm Cutting length) 3/8“ (9 mm Cutting length) 1/2“ (13 mm Cutting length) Trimming guide for side step cut (right) Trimming guide for side step cut (left) Blade cover Cleaning brush Blade oil Operation The fur to be cut must be dry and clean. Brush the fur through to remove any knots. • Remove the blade guard from the cutting head 1. • Place the required trimming guide ( -) with the prongs facing upwards on the cutting head 1 and thereby press the flap of the trimming guide down firmly onto the lower metal edge of the cutting head (see illustration). • Ensure that the trimming guide has properly engaged and is secured before starting to cut/ trim the fur. Note: It is recommended that you begin by trimming a small area to test the individual trimming guides. Start with a trimming guide for long fur and, if necessary, change to a shorter one. The trimming guides allow an average cutting length from 3 -13 mm. • Switch the appliance on by sliding the On/Off switch 3 to the position „ON“. • Slowly run the appliance through the fur against the direction of hair growth. Hold the appliance so that the trimming guide is as flat as possible against the animal. • Additionally, using the adjusting lever 4, the cutting depth of the cutting head 1 can be adjusted stepwise (approx. 2 mm) without changing the trimming guide. To do this, press the adjusting lever 4 backwards to increase the cutting length in steps. Through this, the cutting length of the respective attached trimming guide will also be increased by up to 2 mm. Press the adjusting lever 4 forwards to reduce the cutting length or to bring the trimming guide back into its original position. • Through removal of the individual trimming guide, i.e. using only the cutting head 1 itself, you can cut clean contours. • After use, switch the appliance off by sliding the On/Off switch 3 to the position „OFF“. Cleaning and Care Risk of electric shock Before cleaning, remove the plug from the mains power socket. NEVER submerse the appliance in water or other liquids. • Take the respective trimming guide, if fitted, off. • Using exclusively the cleaning brush , remove the hairs from the cutting head 1. The cutting head 1 may not be cleaned with water or other liquids, except medical alcohol! • If in regular use, the cutting head 1 should be oiled occasionally. For this, use the supplied blade oil . • Remove excess oil with a dry cloth. • Clean the housing with a soft, dry lint-free cloth. • Store the appliance in a dry and dust free location. When it is in storage, place the blade guard on the cutting head 1. - 3 Disposal Do not dispose of the device in your normal domestic waste. This product is subject to the provisions of European Directive 2002/96/EC. Dispose of the appliance over a registered waste disposal firm or at your local community waste disposal facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre. Dispose of all packaging materials in an environmentally friendly manner. Warranty and Service You receive a 3-year warranty for this device as of the purchase date. This appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the case of a warranty claim, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. The warranty covers only claims for material and manufacturing defects, not for transport damage, worn parts or for damage to fragile components, e.g. switches or batteries. This product is for private use only and is not intended for commercial applications. In the event of misuse and improper handling, use of force and interference not carried out by our authorized service branch, the warranty will become void. Your statutory rights are not restricted in any way by this warranty. The warranty period is not extended by repairs effected under warranty. This applies also to replaced and repaired parts. Damages or defects discovered after purchase are to be reported directly after unpacking, at the latest two days after the purchase date. Repairs carried out after lapse of the warranty period are subject to charge. Service Great Britain Tel.: 0871 5000 720 (. 0.10 / minute) E-Mail: kompernass@lidl.gb Service Ireland Tel: 1890 930 034 (0,082 EUR/Min., (peak)) (0,064 EUR/Min., (off peak)) E-Mail: kompernass@lidl.ie Importer KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM, GERMANY - 4 ...