The electrical discharge lamp lights and the electrical discharge begins. The electrical discharge lamp is turned off when the electrical discharge ends, the charge lamp lights, and the charge starts automatically. Leave just as it is until the charge is completed. When the charge is completed, the charge lamp is turned off. Detach the battery from the charger. [Time of refreshing and charge] Battery BP02 is discharged from the state of a full charge at about 960 minutes and the charge is comple

@ f/ratio (backfocus) OTA Dimensions Finder, E.P. adapter, mounting Diam. " with ED 0.67x " Length x Tube Diameter x Weight ED81SWT OTA SX-Trim TS-OR-2608 81mm 625mm @ f/7.7 (150mm) 600mm / 23.6" x 90mm x 2.3-kg / 5.1-lb Dot Finder 2" holder, 1W flip mirror w/T-threads tube rings/dovetail plate 3.2" 419mm @ f/5.2 (100mm) ED103SWT OTA SX-Trim TS-OR-2609 103mm 795mm @ f/7.7 (150mm) 820mm / 32.3" x 115mm x 3.6-kg / 7.9-lb 7x50mm 2" holder, 1W flip mirror w/T-threads tube rings/dovet

CORRECTION 1.PRISM CONST 0mm 2.SHEET CONST 0mm 3.TEMP : +15°C 4.PRESS : 0900hPa 5.ppm 0ppm MODE A 15 C S0 H. angle 92° 20"30' H. dst. V. dst. The valid range of Pressure input is from 600 to 1120 hPa. (420 - 840 mmHg) . When “Atmospheric Correction”in “Initial Setting 1”has been set to “1. AUTO” or “4. NIL”, “”is displayed to the left of the pressure value on the correction menu screen. When “”is on the screen, the pressure cannot be changed. If “Atmospheric Correction”in “Initial Setting 1”has

[DISP] F4 Switches the display composition in the order "H.angle/H.dst./V.dst.", "H.angle/V.angle/S.dst." and "H.angle/V.angle/H.dst./S.dst./V.dst.". [MODE] F5 Switches the screen between MODE A and MODE B. Mode B [S.FUNC] F1 PowerTopoLite [ANG SET] F2 Brings up the angle setting screen for setting anglerelated parameters (H.ANGLE/%GRADE, H.ANGLE INPUT and R/L REVERSE). [HOLD] F3 Pressing this key twice retains (holds) the horizontal angle shown on the display. [CORR] F4 Brings up the screen for

• Reflector sheet, Target and Prism do not face the instrument. • Reflector sheet, Target and Prism are not correctly sighted. • Measurement range is over in Reflectorless mode. • Sufficient signal does not return by sighting sharp edge etc. at Reflectorless mode. Change the object that has much better reflectivity, or use a reflecting sheet, or wait until the sun activity has weakened. Li-batt.voltage is low. • The Date Clock is powered by Have the lithium battery the built-in lithium battery.

PORTA features a newly designed friction system for quickly pointing toward the target and tracking it with 360° slow-motion controls. No fumbling with clutches or sectional slow-motion controls! Leave the heavy counterweights with the equatorials: simply balance scopes up to 155mm diameter (and up to 11-lbs/5kg) on the altitude axis and start viewing! Standard Vixen dovetail mounting slot with lock and safety screw is fully SPHINX/GP-compatible. Mounting slot removes to reveal 1/4"-20 and M8-1

These scopes have faster focal ratios and a more compact length compared to the prior ED 80S and ED 102S telescopes. In fact, the big ED 115S is shorter than the old ED 102S! The new optics are especially good at suppressing the dispersion of violet light — this avoids halos and blooming around images of bright stars. Coupled with a medium f/7.7 focal ratio, the ED "S" series provide a sharp, color-free image of high contrast for both visual and photographic applications. The big Vixen 60mm draw

Copyright © 2005 PENTAX Industrial Instruments Co., Ltd. All Rights Reserved PENTAX Industrial Instruments Co., Ltd. is a sole proprietor of the PTL software. The PTL software and publication or parts thereof, may not be reproduced in any form, by any method, for any purpose. PENTAX Industrial Instruments Co., Ltd. makes no warranty, expressed or implied, including but not limited to any implied warranties or merchantability or fitness for a particular purpose, regarding these materials and make

A 6x30 finder and l1/4" eyepiece adapter are included. (Shown with optional eyepiece, tube rings and dovetail plate on GP-type mount.) Model # TS-ON-8696 Wt: 4.8 kg / 10.6 lbs Newtonian: 130mm/5.1' @ f/S.S Parabolic multicoated mirror R130S OTA GP-Trim Great entry into Vixen quality! The R130S optical tube has 5.1" aperture and yields 0.89 arc-sec of resolution. At f/5.5 this is great for wide-field viewing and imaging of extended objects. 6x30 finder and 1/" eyepiece adapter. (Shown with

FINE SELECT Press the numeric keys [0] [0] [7] in mode A or B. The screen will then change to the command input screen. Press the numeric keys for the desired command number in the Command No. Table. (For example, press [5] [0] [1] for MEAS. MIN DISP.) Press the [ENT] key to access the MEAS. MIN DISP. 63 PENTAX R-300 (p65-88) 10/30/02 11:11 AM Page 65 10 CHECKS AND ADJUSTMENTS 10 CHECKS AND ADJUSTMENTS . Checks and Adjustments should be performed before and during measurement. . The instrument s