valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
The illustration below details the functionality of the LED indicators. .... Lamp on Lamp on DMX OK DMX OKNO DMX NO DMX Lamp off Lamp off The first LED indicators represents DMX signal: • If the indicators is on a clean DMX signal is present • If the indicator is off there is no DMX signal present The second LED indicator represents lamp condition; this is only applicable to fixtures with traditional lamp sources. ©Elation Professional, Los Angeles Ca. 17 DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 18 9. DISPLAY MENU Default settings shaded. ADDR AXXX (1-512) Set the starting DMX address DISP ON/OFF Display “Blackout” function. When activated the display will automatically blackout when not in use. FLIP ON/OFF When “ON” this function rotate the display 180° 3 CH 3 DMX CHANNELS (RGB) 4 CH 4 DMX CHANNELS CHAN (RGB+MASTER DIM) 6 CH 6 DMX CHANNELS MODE SLAV ON/OFF UNIT FUNCTIONS AS SLAVE MAST Fixture will function as a master unit in Master/Slave CNTL mode ALON Fixture will function “Stand Alone” mode BLAC .. BLACKOUT – LED OUTPUT OFF RED RXXX Manual Mode - Manual setting of RED levels GREN GXXX Manual Mode - Manual setting of GREEN levels BLUE BXXX Manual Mode - Manual setting of BLUE levels MANU COLR STRB SXXX Manual Mode - Manual setting of STROBE rate SPED XXX Adjust program 1 speed CHS1 FADE XXX Adjust program 1 fade time STRB XXX Adjust strobe rate of program 1 SPED XXX Adjust program 2 speed CHS2 FADE XXX Adjust program 2 fade time STRB XXX Adjust strobe rate of program 2 SPED XXX Adjust program 3 speed CHS3 FADE XXX Adjust program 3 fade time STRB XXX Adjust strobe rate of program 3 CHAS CHS4 SPED XXX Adjust program 4 speed DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 19 FADE XXX Adjust program 4 fade time STRB XXX Adjust strobe rate of program 4 SPED XXX Adjust program 5 speed FADE XXX Adjust program CHS5 5 fade time STRB XXX Adjust strobe rate of program 5 SPED XXX Adjust program 6 speed CHS6 FADE XXX Adjust program 6 fade time STRB XXX Adjust strobe rate of program 6 SPED XXX Adjust program 7 speed CHS7 FADE XXX Adjust program 7 fade time STRB XXX Adjust strobe rate of program 7 SPED XXX Adjust program 8 speed FADE XXX Adjust program 8 fade time CHS8 STRB XXX Adjust strobe rate of program 8 DIMR MOD1 .. Standard - Fixture will function with a stepping dimmer rate .. MOD2 .. Linear - Fixture will function with a dimming rate of 0~100% LODA .. .. Reset to Fixture to the Factory Default Settings OTHR VER V X.X .. “X.X’ will represent the fixture’s current firmware version Note: 1) If the fixture does not receive a DMX signal the menu display will flash repeatedly. 2) SPED: Adjust the hold time for each scene in built-in chase programs. 3) FADE: Adjust the fade time between each scene in the built-in programs. DESIGN LED 36 Pro™ 10.DMX TRAITS DMX Operation Notes: The fixture will function in DMX mode whenever the unit is receiving a DMX signal. Please note that this will override all manual settings. This unit will keep and retain the last DMX command in the event of DMX signal failure. To reset the fixture you must turn the power off. DMX CHANNEL TRAITS The charts below and on the preceding pages outline the different DMX traits for the three different DMX modes. 3-Channel mode: In this mode channel one controls all the red LEDs, channel two controls all the green LEDs, and channels three controls all the blue LEDs. 3-Channel Mode: The chart below details the DMX channel layout for 3-channel assignment. ©Elation Professional, Los Angeles Ca. 20 DESIGN LED 36 Pro™ DMX channel’s functions and their values (3-Channel Mode): Channel 1 -Red: 0-255 Red (0-Black, 255 -100% Red) Channel 2 -Green: 0-255 Green (0-Black, 255 -100% Green) Channel 3 -Blue: 0-255 Blue (0-Black, 255 -100% Blue) 4-Channel mode: In this mode channel one controls all the red LEDs, channel two controls all the green LEDs, channels three controls all the blue LEDs, and channel four--will control the master dimming level. 4-Channel Mode: The chart below details the DMX channel layout for 4-channel assignment. ©Elation Professional, Los Angeles Ca. 21 DESIGN LED 36 Pro™ DMX channel’s functions and their values (4-Channel Mode): Channel 1 -Red: 0-255 Red (0-Black, 255 -100% Red) Channel 2 -Green: 0-255 Green (0-Black, 255 -100% Green) Channel 3 -Blue: 0-255 Blue (0-Black, 255 -100% Blue) Channel 4 -Dimming / Program Speed Control This channel has two functions depending on the operating mode. When running the built-in programs this channel will control the program speed. 0-255 Dimming (0%-100%) ~ Normal Operation 0-255 Speed (min to max) ~ When running built-in programs on channel 4 6-Channel mode: In this mode channels 1~3 are used to control the RGB LEDs and channels 4~6 will control special features. 6-Channel Mode: The charts below and on the next page detail the DMX channel layout for 6-channe...