valutazioni - 2, GPA: 3.5
(
)
)
|
Facilità d'uso
3. Clamp the workpiece between the two clips 5 . Q Solder sponge CAUTION! The hot soldering tip 2 must never be placed in contact with a dry solder sponge 8 , otherwise the solder sponge may be damaged. j The solder sponge 8 is used to clean soldering tips. j Moisten the solder sponge 8 before you use it. 14 GB/IE/CY Operation/Maintenance and cleaning grease or soldering fluid) as a flux. Clean the soldering tip 2 on the moist solder sponge 8 . After cleaning the tip 2 it must be “tinned” (coated with solder). This is done by melting solder on to the hot soldering tip 2 . Guide the soldering tip 2 to the intended joint site and heat the joint. Place the solder (with flux) between the joint site and the tip 2 Q Soldering — The soldering pencil has a rated output of 30watts and is therefore ideal for electronics soldering. — The design of the soldering pencil makes it especially suitable for use where access is difficult or for fine soldering work. — To achieve the best results use electronics solder 1.0 (10g electronics solder with integrated flux is included) or 1.5 mm diameter 60% Sn. We recommend the use of soldering paste (not soldering j j j j to melt it. j Continue to feed further solder until the whole joint has a covering of solder. j Then quickly remove the soldering tip in order to avoid overheating the molten solder. j Allow the solder to harden while not subjecting it to vibration or movement. j Note: The flux is either already contained in the solder or applied separately. Ask the advice of the retailer when buying solder in order to choose the most suitable solder for your intended purpose. Q Maintenance and cleaning WARNINg! RISK OF INJURY! Before you carry out any work on the device always pull the mains plug out of the mains socket and allow the device to cool. GB/IE/CY 15 Maintenance and cleaning/Service centre/Warranty j Clean the device after you have finished using it. j Use a cloth and a little mild detergent for cleaning the device. j In no circumstances use sharp objects, or petrol, solvents or cleaning agents that might attack plastic. j Do not allow any liquids to enter the inside of the device. Q Service centre qualified specialist personnel using original manufacturer parts only. This will ensure that your device remains safe to use. that your device remains safe to use. Q Warranty This appliance is guaranteed for 3 years from the date of purchase. It has been carefully produced and meticulously checked before delivery. Please keep your receipt as proof of purchase. Contact your service centre by telephone in case of questions pertaining to the warranty. Your goods can be transmitted free of cost only in this manner. This warranty applies only to the initial purchaser and is nontransferable. J WARNINg! Have your device repaired only by J WARNINg! If the plug or mains lead needs to be replaced, always have the replacement carried out by the manufacturer or his service centre. This will ensure 16 GB/IE/CY Warranty The warranty covers only material or manufacturing faults, not normal wear or damage to fragile parts such as switches or rechargeable batteries. The appliance is intended solely for private, not commercial, use. If this product has been subjected to improper or inappropriate handling, abuse, or interventions not carried out by one of our authorised sales and service outlets, the warranty will be considered void. This warranty does not affect your statutory rights. gB DES Ltd Units 1415 Bilston Industrial Estate Oxford Street Bilston (great Britain) WV14 7Eg Tel.: 0870/7876177 Fax: 0870/7876168 email: support.uk@kompernass.com IE Komperna. Service Ireland Tel.: 1850 930 412 (0,082 €/Min.) * Standard call rates apply. Mobile operators may vary. email: support.ie@kompernass.com GB/IE/CY 17 Disposal Q Disposal The packaging and ancillary packing consist wholly of environmentally friendly materials. They can be disposed of at your local recycling facility. Do not dispose of electrical devices with the household rubbish! In accordance with European Directive 2002/96/EC (covering waste electrical and electronic equipment) and its transposition into national legislation, worn out electrical devices must be collected separately and taken for environmentally compatible recycling. Contact your local refuse disposal authority for more details of how to dispose of your worn-out devices. 18 GB/IE/CY Declaration of conformity/Producer Q Declaration of conformity / Producer We, Komperna. GmbH, Burgstr. 21, D-44867 Bochum, Germany, hereby declare that this product complies with the following EU directives: EU Low Voltage Directive (2006/95/EC) Electromagnetic Compatibility (2004/108/EC) Device type/description: Soldering gun with holder Bochum, 30.06.2009 Hans Komperna. - Managing Director We reserve the right to make technical modifications in the course of further development. GB/IE/CY 19 IAN: 33381 KompernaSS GmbH Burgstra.e 21 D-44867 Bochum © by orFGen marketing Last Information Upda...