Log:
valutazioni - 3, GPA: 3.7 ( )

Istruzioni per l'uso Lindy, Modello 40592

Produttore : Lindy
File Size : 108.97 kb
File Nome : 40592.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


40592 Introduction Thank you for purchasing the LINDY Heavy Duty Notebook Security Bracket. This robust security bracket effectively secures your notebook PC to a wooden desk or metal shelf. Its high visibility design is ideal for use in schools, offices, libraries, shops and other public display environments. Packing List ■ 2 x Adjustable arms ■ Desktop bracket with base plate ■ Locking section ■ Heavy duty lock & 2 keys ■ Key ring ■ 1m foam ■ 4 x Nuts ■ 4 x Bolts ■ Spanner Requirements for Installation ■ Tape measure ■ An electric drill with an 8mm bit suitable for wood or metal use (depending on installation) Installation Important! This bracket will accommodate notebooks with the following width dimensions -Minimum width: 30cm; Maximum width: 50cm 2. Once the base plate has been positioned, mark two holes through the bolt apertures. Drill through the desk at the marked positions using an 8mm drill bit. When installing the bracket, make sure the desk is at 90 degrees to the wall and not on a sloped surface. For steel shelving or desks use the small bolts to secure the base plate and use the larger bolts to secure the arms together. For a wooden shelf or desk, use the larger bolts to secure the base plate and the smaller bolts to secure the arms together. 1. Place the base plate 100mm from the rear of the desk. Make sure you can get the heavy duty lock into the desktop bracket and that the notebook does not overhang the desk. 3. From underneath the desk, push two bolts through the base plate and secure to the internal anchor plate. Place the nuts on the bolts and tighten using the supplied spanner. Internal 4. Place the external cover over the internal anchor plate. 6. Insert each arm into either side of the desktop bracket. Ensure that the arm with the square holes is at the front and the arm with the round holes is at the rear. Adjust the width of the arms according to the size of your notebook. Put the 2 spare bolts into the outermost points ensuring they go through both arms. 5. 1m of protective foam is included. To protect your notebook from being damaged or scratched by the metalwork, this should be added to the arms BEFORE proceeding with final assembly. Please apply the foam to all areas the notebook comes into contact with. 7. Once you have inserted your laptop into the bracket, put the locking bolt through the eye hole and lock into place. ni . Once the notebook is in place you can insert the locking bolt. (Notebook removed for illustration purposes) LINDY No. 40592 1st Edition February 2006 www.lindy.com...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie