valutazioni - 7, GPA: 4.3
(
)
)
|
Facilità d'uso
General Operation Play/Pause button — Press once to start playback in the original order. Press again to stop play temporarily (pause). Stop button — Press once to stop playback. Press again to turn off the power. Skip / Search buttons — Press once to skip to next track or back to the beginning of the current track with . — Press and hold to search forward or reverse . Volume + — Increase volume. Volume - — Decrease volume 9. Various Playing Modes Press the MODE button (2) to cycle through the replay modes: NORMAL 1 ALL INT RND NORMAL. A. Repeat Play During PLAY mode • Press the MODE button once to play the current track repeatedly. • The repeat indicator 1 will appear in the display. During PLAY mode • Press the MODE button twice to play the entire disc repeatedly. • The repeat indicator ALL will appear in the display. NOTE:To cancel REPEAT press the MODE button until the repeat indicator disappears. B. Intro Scan In STOP mode • Press the MODE button three times. • The INT indicator will appear in the display. • Press the PLAY button to play the first 10 seconds of each track on the disc. NOTE:To cancel INT SCAN press the MODE button until the INT indicator disappears. C. Random Play In STOP mode • Press the MODE button four times. • The RND indicator will appear in the display. • Press the PLAY button, all the tracks on a disc will be played in random sequence. NOTE: To cancel RANDOM PLAY press the MODE button until the RND indicator disappears. Program Play 1. In stop mode, press the PROG button (5) to create your own playlist. 2. “ PGM 00 01” will be displayed, “00” stands for the track number, “01” stands for the position on the playlist. * “PGM 00 ” is flashing. 3. Press or button to select the desired track. 4. Press the PROG button again to enter the track into memory. The program number is increased by one. * The program number “01” changes to “02”. 5. Repeat steps 3 and 4 to program the order of up to 20 tracks. 6. Press to start program replay. 7. To stop the function, press the STOP button once. 8. To resume playing in the programmed sequence press PROG and buttons. 9. To check the PROG memory press or in PROG play mode. 10. To erase the program memory OPEN the disc drive or turn off the power. DIGITAL ANTI-SHOCK PROTECTION The digital ANTI-SHOCK PROTECTION uses semiconductor memory to prevent the player from skipping when the unit is subjected to shocks and vibration during play. When the PLAY/PAUSE button is pressed and the power turns on, the digital Anti-Shock Protection turns on automatically. The display “ASP” will flash and the function is initialized, when “ASP” stops flashing, the data buffer is full. It will give approximately 60 seconds protection against skipping. If the player is subjected to shocks for more than 60 seconds, some skipping will occur; this is normal and to be expected, the sound will resume once the player has stabilized from the shock. LOW BATTERY INDICATION When the low battery indicator appears in the display the batteries must be replaced. Always replace both batteries, do not mix old and new batteries or batteries of different types. 10. PRESET EQUALIZER Press the EQ button (1) to cycle through the preset equalizer settings: NORMAL POP ROCK SRR (surround) NORMAL. The display shows the corresponding setting. CARE & MAINTENANCE Cleaning the Lens If the lens becomes dusty, clean it with camera lens blower. Be careful not to scratch the lens. Cleaning the Cabinet From time to time, clean the cabinet with a soft dry cloth. For more stubborn stains, slightly moisten the cloth with water or a mild detergent solution. Never use benzene, alcohol or other solvents as they may damage the finish of the cabinet. SPECIFICATIONS Output: 20mW (32.) Frequency response: 100Hz – 20KHz Power Source: 2 x UM-3 or AA size batteries 4.5V (500mA) AC/DC adaptor Dimensions: 142mm (W) x 155mm (D) x 26mm (H) Net weight : 226g ** For improvement purposes, specification and design are subject to change without notice. ** TROUBLE SHOOTING GUIDE Cleaning a Disc When a disc becomes dirty, clean it with a soft cloth. Wipe the disc from the center to the outside. Note: Do not use solvents such as benzene, thinners, commercially available cleaners or anti-static spray intended for records. ** Should you experience difficulties in the use of this player please refer to the following chart before contacting your dealer or the place of purchase. WARNING: TO MINIMISE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. DO NOT OPEN THE PLAYER AS IT CONTAINS DANGEROUS VOLTAGE. ONLY QUALIFIED TECHNICIANS ARE ALLOWED TO CARRY OUT REPAIR AND SERVICE. CARE AND MAINTENANCE Do not subject electronic devices to extreme temperatures or moisture, do not use in bathrooms or near stoves, ovens or heaters. This player is manufactured to the highest safety and quality standards. Nevertheless, take care when handling electric devices. Clean only after disconnecting from mains power supply,...