Log:
valutazioni - 3, GPA: 5 ( )

Istruzioni per l'uso COBY electronic, Modello CX-CD1112

Produttore : COBY electronic
File Size : 2.31 mb
File Nome : CXCD1112_MN.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


Press (or ) button to change the track # during the play mode. FF REW PLAY/PAUSE FF REW (2) During play, press button to play previous track. REW Press FF button Press REW button at the head of NO.4 (2) Press MODE button twice to repeat all tracks. (1) Press MODE button once t o repeat one track. (2) Press PLAY button to start INTRO from track No.1. To listen to the first 10 seconds of each track. (1) Press MODE button three times and INTRO will flash. During play, press and hold (or ) button to fast forward (or fast reverse) to the current track. FF REW (2) Press ( ) button to play tracks in random order. PLAY/PAUSE (3) Press FF button to play tracks in random order. (5) To cancel RANDOM mode, press RAN D or STOP ( )button. (d) Repeat (b)~(c)to set up 20 tracks. The display will show the current set track. (e) Tracks set can be checked by pressing PROG. button. (1) TO PROGRAM INTRO PLAY (c) When desired track is displayed, press PGM. button to set. (a)Press button at stop mode and "PROG" will display and flash. PGM (2) Press ( )button to start the programmed tracks. TO COMPLETE THE PROGRAMMING AND TO PLAY PLAY/PAUSE (b) Press (or ) button to select the track number. FF REW (2) When the voltage is too low, the unit will automatically turn off. (1) is displayed when the battery voltage reaches low. (3) TO CLEAR THE PROGRAMMING Press STOP( )button. (1) Press RAND button to play tracks in random order. RND will flash. (2)LCD shows" "and then total number of all the tracks. (3)LCD shows NO DISC when CD is not in the unit. Maximum Output (Stereo Headphone..15mW+15mW(32ohm) Single Output........................................0.6V, 47kohm AC Adapter......................................120V 60Hz(not included in CX-CD116) DC....................................................4.5V with DC Adapter 3V with 2 size "AA" Batteries(not included) General 1 ALL RND INTRO RND RND PROG PROG Due to the nature of CD technology, the unit uses power even when the RAND Do not attempt to recharge alkaline batteries . This may cause leakage and damage to the unit. Do not mix alkaline batteries with rechargeable batteries. Do not leave the batteries on recharge for long periods of time. This can damage the performance of the cells. unit is off. To extend the batteries' life, use the adapter for indoor operation or where power is supplied. Use the battery operation only when the unit is in mobile. The Dynamic Bass Boost System(DBBS) enhances the low frequency(Bass) response of the output. Set the Volume to low listening level and press DBBS switch in the direction of the arrow to turn this function ON. Note: Some CD's with DBBS may exceed the bass response capacity and can cause distortion. To avoid this, do not play DBBS in high volume. Playing DBBS in high volume may cause damage to the headphone and more importantly, to your hearing. Hearing experts advise against the constant use of personal stereos played at high volume. Constant high volume use can lead to hearing loss. If you experience ringing in the ears or hearing loss, discontinue use and seek medical advice. This HOLD function prevents any unwanted function changes during PLAY or STOP mode. Slide HOLD switch to the arrow direction (or opposite) to turn the function ON (OFF). No other function buttons operate on HOLD mode, except DBBS function button. . Your unit operates on two(2)AA size alkaline batteries. Open the battery compartment cover and insert the batteries in the battery compartment following the polarity diagram located inside. You can operate this unit with two "AA" rechargeable batteries. For new or exhausted rechargeable batteries, we recommend that batteries are recharged for 15 hours before use. (Refer to battery manufacturer's guide) When operating the unit with AC adapter and non-rechargeable batteries in the compartment, please make sure to set the "charge" switch to "off" position to avoid damaging the unit. To remove the disc from its storage case, press down on the center of the case and lift the disc out. Hold it carefully by the edges as shown below. 3. Unplug the AC adapter after charging. DO NOT CHARGE THE BATTERIES MORE THAN 24 HOURS OR MORE THAN RECOMMENDED TIME. OVERCHARGING MAY DETERIORATE THE PERFORMANCE OF THE RECHARGEABLE BATTERIES. 4.If the operating time decreases drastically after the batteries have been recharged properly, purchase new rechargeable NiCd batteries. R 1.Open the battery compartment cover and insert the rechargeable batteries (2 x "AA" )in the battery compartment following the polarity diagram located inside BOTH BATTERIES MUST BE RECHARGEABLE NiCd TYPES OR THE BATTERIES MAY EXPLODE OR LEAK. 2.Plug in AC adapter and slide the "CHARGE SWITCH" to "ON" position to start charging USE ONLY THE AC ADAPTER SUPPLIED WITH THE UNIT FOR CHARGING. direction to remove dust, fingerprints or any other particles on the disc surface. Never use chemicals, such as record sprays , anti-static sprays, benzene or thinners to clean the CD. Thes...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie