valutazioni - 5, GPA: 4.2
(
)
)
|
Facilità d'uso
To change over to battery supply, pull out the English English Cassette Playback Recording DECK 1 AW 7150 only I m ■A PAUSE STOP EJECT AW 7250 only F.FWD REWIND PLAY ■am DIRECTION STOP F.FWD REWIND PLAY REVERSE EJECT DECK 2 PAUSE STOP F.FWD REWIND PLAY RECORD EJECT CASSETTE PLAYBACK PLAYBACK ON DECK 1 OR 2 • Set the TAPE/RADIO selector to TAPE. • Press EJECT A and insert a recorded cassette • For playback, any cassette type can be inserted. • Adjust the sound with the VOLUME and TONE controls. You may connect stereo headphones with 3.5 mm plug to socket O PHONES. The loudspeakers will then be muted. • Press PLAY < and playback will start. • Press STOP ■ if you want to stop the playback before the end off the tape. The set is then switched off. On pressing again, the cassette holder will open (EJECT). - When the end of the tape is reached, the recorder buttons are released. FOR AW 7250 ONLY • For playback on deck 1, set the REVERSE button O to: - JL~D single reverse, to play both cassette sides once. At the end of the first cassette side, the tape direction is reversed and the recorder stops at the end of the second cassette side. - ^ CJ continuous reverse for non-stop playback. The recorder reverses the tape direction whenever reaching the end of the cassette. To stop, STOP ■ must be pressed. - Select the tape direction to start with using the DIRECTION button -<►. The DIRECTION indicators <3 E> show the actual tape direction. • During playback you can reverse the tape direction at any moment using the DIRECTION button -<►. CONTINUOUS PLAY - deck 2 followed by deck 1_ • Set the TAPE/RADIO selector to TAPE. • Press both EJECT A buttons and insert a recorded cassette into both decks. • On deck 1, set the REVERSE button O to jl ~D and select the tape direction using the DIRECTION button «►. For AW 7250 only. • Press PLAY ► on deck 1 and PAUSE II and PLAY ► on deck 2 : deck 1 will play and deck 2 stands still. As soon as deck 1 stops (at the end of the cassette or when its STOP ■ button is pressed), PAUSE II is released and deck 2 will start playing back. • To stop, press STOP ■; the set is then switched off. 6 Recording RECORDING Copyright: Recording is permissible insofar as copyright or other rights of third parties are not infringed. Safeguarding a cassette against erasure: Accidental erasure can be prevented by breaking the small tab in the top corner of the back of the cassette. This protection can be reversed with a piece of adhesive tape placed over the same corner. Winding the tape • Press F.FWD •« to fast forward the tape. • Press REW ►► to fast rewind the tape. • Press STOP ■ to stop fast forward or fast-rewind, or before the end of the tape. RECORDING (on deck 2 only)_ • Press EJECT A to open the cassette holder. • Insert the cassette into deck 2. For recording you must use a NORMAL cassette (IEC I) on which the tabs have not been broken. At the very beginning of the tape, no recording will take place during the first seven seconds when the leader tape passes the recorder heads. • When monitoring during recording, adjust the sound with the controls VOLUME and TONE. These controls do not affect the recording. • To stop. Press STOP ■. RECORDING FROM THE RADIO • Set the TAPE/RADIO selector to RADIO. Mono recording from the built-in microphone • Set the TAPE/RADIO selector to TAPE • Set the VOLUME control to the minimum volume level (during microphone recordings, monitoring is not possible) STARTING AND STOPPING THE RECORDING_ • To start recording, press RECORD • and PLAY < is then pressed at the same time. - When the end of the tape is reached, the recorder buttons are released. • To interrupt recording, press PAUSE II. • To continue recording, press PAUSE II again. • Press STOP ■ if you want to stop the recording before the end of the tape. On pressing again, the cassette holder will open. • The set is switched off if the TAPE/RADIO selector is in position TAPE and no buttons are pressed. DUBBING - Copying from deck 1 to 2_ When dubbing, it is recommended to use fresh batteries or to connect the set to the mains supply. • Set the TAPE/RADIO selector to: - DUBBING - for normal speed copying - HI-SPEED DUBBING - for high speed copying Do not switch this switch during dubbing. • Press both EJECT A buttons and insert a recorded cassette into deck 1 and a cassette which is suited for recording into deck 2. • Press PAUSE II followed by RECORD • on deck 2. • To start dubbing, press PLAY 4 on deck 1. • Press PAUSE II on deck 2 if you wish to omit undesired passages and the playback in deck 1 will continue. To restart dubbing,' press PAUSE II...
Questo manuale è adatto anche per i modelli :Lettori - AW 7250 (333.88 kb)
Orologi - AW7150/14S (333.85 kb)
Orologi - AW7150/00S (333.85 kb)
Orologi - AW7150/20P (333.85 kb)