valutazioni - 5, GPA: 4.4
(
)
)
|
Facilità d'uso
The front panelwillbe detached from the head unit. • Keep this manualhandy as a reference for operating procedures and precautions. • Always keep the volume low enough so you can hear sounds outside of the car. • Protect this product from moisture. • If the battery is disconnected or discharged, the preset memory willbe erased and must be reprogrammed. Attaching the front panel 1 Place the front panel flat against the head unit. 2 Press the front panel into the face of the head unit until it is firmly seated. B En CD English 02) (What's What ) ( ) Head unit © CLOCK button Press to change to the clock display. © CD EJECT button You can eject a CD by pressing CD EJECT. © AUDIO button Press to select various sound quality controls. © A/T/^/^ buttons Press to do manualseek tuning, fast forward, reverse and track search controls. Also used for controlling functions. © DETACH button Press DETACH to release the front panel. © BAND button Press to select among three FM and one AM bands and cancelthe control mode of functions. © LOUDNESS button Press to turn loudness on or off. © LOCAL/BSM button Press to turn localfunction on or off. Press and hold to turn BSM function on or off. © 1-6 buttons Press for preset tuning. ® SOURCE button This unit is turned on by selecting a source. Press to cycle through allof the available sources. © VOLUME Press to increase or decrease the volume. © EQ button Press to select various equalizer curves. E CD En Section ( Power ON/OFF ) C Turning the unit on • Press SOURCE to turn the unit on. When you select a source the unit is turned on. Selecting a source You can select a source you want to listen to. To switch to the built-in CD player, load a disc in this unit (refer to page 10). • When using the head unit, press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources: Built-in CD player—Tuner Notes • When no disc has been set in the unit, the source will not switch to the built-in CD player. • When this unit's blue/white lead is connected to the car's auto-antenna relay control terminal, the car's antenna extends when this unit's source is turned on. To retract the antenna, turn the source off. Turning the unit off • Press SOURCE and hold until the unit turns off. IZ En CD English Section Listening to the radio i'. rf / gig .. m © 2 3 4 © Band indicator Shows which band the radio is tuned to, AM or FM. © Frequency indicator Shows to which frequency the tuner is tuned. © Stereo (©) indicator Shows that the frequency selected is being broadcast in stereo. ® Preset number indicator Shows what preset has been selected. 1 Press SOURCE to select the tuner. 2 Use VOLUME to adjust the sound level. Rotate to increase or decrease the volume. 3 Press BAND to select a band. Press BAND untilthe desired band is displayed, F1, F2, F3 for FM or AM. 4 To perform manual tuning, press < or ► with quick presses. The frequencies move up or down step by step. 5 To perform seek tuning, press and hold < or ► for about one second and release. The tuner willscan the frequencies untila broadcast strong enough for good reception is found. ■ You can cancel seek tuning by pressing either ^ or ► with a quick press. ■ If you press and hold ^ or ► you can skip broadcasting stations. Seek tuning starts as soon as you release the buttons. Note When the frequency selected is being broadcast in stereo the stereo (®) indicator will light. £ Storing and recalling broadcast frequencies If you press any of the preset tuning buttons 1-6 you can easily store up to six broadcast frequencies for later recallwith the touch of a button. • When you find a frequency that you want to store in memory press a preset tuning button 1-6 and hold until the preset number stops flashing. The number you have pressed willflash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. The next time you press the same preset tuning button 1-6 the radio station frequency is recalled from memory. Notes • Up to 18 FM stations, 6 for each of the three FM bands, and 6 AM stations can be stored in memory. • You can also use ▲ and ▼ to recall radio station frequencies assigned to preset tuning buttons 1-6. E CD En Tuning in strong signals Localseek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Press LOCAL/BSM to turn local seek tuning on. LOC appears in the display. 2 When you want to return to normal seek tuning, press LOCAL/BSM to turn local seek tuning off. E Storing the strongest broadcast frequencies BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 1-6 and once stored there you can tune in to those frequencies with the touch of a button. • Press LOCAL/BSM and hold until the BSM turns on. BSM begins to flash. While BSM is fl...