valutazioni - 3, GPA: 5
(
)
)
|
Facilità d'uso
2 Plug the voltage converter into the cigarette lighter jack (only for 12 V car battery, negative grounding), then connect the wired end with 4.5V DC input jack on the set. 3 If necessary, clean the cigarette lighter jack to obtain a good electrical contact. 4 Turn down the volume and connect the cassette adapter plug to LINE OUT/p on the set. 5 Carefully insert the cassette adapter into the car radio’s cassette compartment. 6 Make sure the cord does not hinder your driving. 7 Decease the volume on the set, if necessary. Start playback on the set and adjust the sound with the car radio controls. • Always remove the voltage converter from the cigarette lighter jackwhen the set is not in use. Note: If your car radio has a LINE IN jack, it is better to use it for the car radio connection instead of the cassette.adapter. Connect the signal lead to this LINE IN jack and to LINE OUT/p on the set. CD PLAY / FEATURES • If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded properly, nF dISC is displayed, indicating that the CD has not been finalized. In that case, use FINALIZE on your CD recorder to complete the recording. • When playing a CD-Rewritable (CD-RW), please note that it takes 3–15 seconds after pressing 2; for sound reproduction to start. • Playback will stop if you open the CD lid. • While the CD is read, 01 --:-- flashes in the display. Volume and bass Volume adjustment • Adjust the volume by using VOL E. Bass adjustment • Press DBB to switch the bass enhancement on or off yDBB appears if the bass enhancement is activated. 4,5 V DC 12 V DC 44 9 OPEN VOL E OFF•RSUME•HOLD OUT LINE / DBB FEATURES You can store up to 30 tracks to play in a program. A single track may be stored more than once in the program. 1 While playback is stopped, select a track with ° or¤. 2 Press PROG to store the track. yPROG lights up; the track number programmed and P with the total number of stored tracks are displayed. 3 Select and store all desired tracks in this way. 4 Press 2; to start playback of your selected tracks. yPROG is shown and playback starts. • You can review the program by pressing PROG for more than 2 seconds. yThe display shows all the stored tracks in sequence. Notes: – If you press PROG and there is no track selected, SELECt is displayed. – If you try to store more than 30 tracks, FULL is displayed. Clearing the program • While playback is stopped, press 9 to clear program. yCLEAr is displayed once, PROG goes off, and the program is cleared. Note: The program will also be cleared if the power supply is interrupted, or if the CD-player lid is opened, or if the set switches off automatically. FEATURES / TROUBLESHOOTING You can interrupt playback and continue (even after an extended period of time) from the position where playback stopped (RESUME) and you can lock all buttons of the set so that no action will be executed (HOLD). Use the RESUME–HOLD–OFF slider for these functions. RESUME – continuing from where you have stopped 1 Switch the slider to RESUME during playback to activate RESUME. yRESUME is shown. 2 Press 9 whenever you want to stop playback. 3 Press 2; whenever you want to resume playback. yRESUME is shown and playback continues from where you have stopped. • To deactivate RESUME, switch the slider to OFF. yRESUME goes off. HOLD – locking all buttons You can lock the buttons of the set by switching the slider to HOLD. Now, when a key is pressed, no action will be executed. This is of use, for example, when transporting the player in a bag. With HOLD activated, you can avoid accidental activation of other functions. 1 Switch the slider to HOLD to activate HOLD. yAll buttons are locked. HoLd is shown when you press any button. If the set is switched off, HOLD will be shown only when 2; is pressed. 2 To deactivate HOLD, switch the slider to OFF. Note: If you deactivate HOLD by switching the slider to RESUME, you will be activating the RESUME function. 4 ESP PROG ESP ESP PROG UME•HOLD OUT LINE / ESP RESUME E S P HOLD Programming track numbers RESUME and HOLD • Do not touch the lens Aof the CD player. • Do not expose the unit, batteries or CDs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). • You can clean the CD player with a soft, slightly dampened, lint-free cloth. Do not use any cleaning agents as they may have a corrosive effect. • To clean the CD, wipe it in a straight line from the center toward the edge using a soft, lint-free cloth. A cleaning agent may damage the disc! Never write on a CD or attach a sticker to it. • The lens may cloud over when the unit is moved suddenly from cold to warm surroundings. Playing a CD is not possible then. Leave the CD player in a warm environment until the moisture has evaporated. • Active mobile phones in the vicinity of the CD player may cause malfunctions. • Avoid dropping the unit as this may cause damage. Headphones • Connect the supplied headphones to the LINE OUT/p jack of the player. Note: LINE ...
Questo manuale è adatto anche per i modelli :Lettori - MPC225SL (820.56 kb)