|
Facilità d'uso
Side A Tab for side A Tab for side B • The use of a cassette with more than 90 minutes of play time is not recommended except for long, continuous recording or playback. 29GB Additional Information Troubleshooting Symptom Remedy The power is not on. • Connect the AC power cord to a wall outlet securely. • Make sure the batteries are inserted correctly. • You cannot turn on the player with the remote when you operate the player on batteries (CFDS38/ S38L/S55 only). There is no audio. • Make sure the function you want to use appears in the display window. • Adjust the volume. • Unplug the headphones when listening through speakers. Noise is heard. • Someone is using a portable telephone or other equipment that emits radio waves near the player. nMove the portable telephone, etc., away from the player. “no disc“lights in the display even •Insert the CD with the label surface up. when a CD is in place. The CD does not play. • Make sure that the CD compartment is closed. • Place the CD with the label surface up. • Clean the CD. • Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation. • Make sure“Cd”appears in the display. The sound drops out. • Reduce the volume. • Clean the CD, or replace it if the CD is badly damaged. • Place the player in a location free from vibration. The audio is weak or has poor • Replace all the batteries with new ones if they quality. are weak. • Move the player away from the TV. • If you are using the remote while listening to AM or MW/LW radio, noise may be heard. This is unavoidable. The picture of your TV becomes • If you are listening to an FM program near the unstable. TV with an indoor antenna, move the player away from the TV. Radio CD Player General 30GB Additional Information Symptom Remedy The tape does not move when you press an operation button. • Close the tape compartment securely. The REC r button does not function/The tape does not play. • Make sure the safety tab on the cassette is in place. • Make sure“TAPE”appears in the display. The tape does not erase completely. • Clean the erasing head (see page 32). Tape Player• Replace all the batteries with new ones if they are weak. • The source which was recorded on TYPE II (high position) or TYPE IV (metal) tape using this unit is being played. Record on TYPE I (normal) tape and play. The tape does not record. • Make sure the tape is inserted properly. • Make sure the safety tab of the cassette is in place. The audio is weak/The audio quality is poor. • Clean the heads, pinch roller and capstan (see page 32). • Demagnetize the heads using a demagnetizer (see page 32). The sound is distorted. • The TYPE II (high position) or TYPE IV (metal) tape is being used. Use TYPE I (normal) tape only. The timer does not operate.r• Make sure the time on the clock is correct. Time• Check to see if the AC power had been cut off. • Make sure the t(clock) indication is displayed. The remote does not function. • Replace all the batteries in the remote with new ones if they are weak. (CFD-S38/S38L/S55 only) • Make sure that you are pointing the remote at the remote sensor on the player. Remote• Remove any obstacles in the path of the remote and the player. • Make sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lamp light. • Move closer to the player when using the remote. After trying the above remedies, if you still have problems, unplug the AC power cord and remove all the batteries. After all the indications in the display disappear, plug the power cord and insert the batteries again. If the problem persists, please consult your nearest Sony dealer. 31GB Additional Information Maintenance Cleaning the lens If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available blower. Cleaning the tape heads and tape path Wipe the heads, the pinch roller and the capstan with a cleaning swab slightly moistened with cleaning fluid or alcohol after every 10 hours of operation for optimum playback and recording quality. To make the best possible recording, however, we recommend that you clean all surfaces over which tape travels before each recording. Erase head Capstan Pinch roller Record/playback head Lens After cleaning, insert a tape when the areas cleaned are completely dry. Demagnetizing the tape heads After 20 to 30 hours of use, enough residual magnetism will have built up on the tape heads to begin to cause loss of high frequency sound and hiss. At this time, you should demagnetize the heads and all metal parts in the tape path with a commercially available tape head demagnetizer. Cleaning the cabinet Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. 32GB Additional Information Specifications CD player section System Compact disc digital audio system Laser...
Questo manuale è adatto anche per i modelli :Lettori - CFD-S28L (578.61 kb)
Lettori - CFD-S38L (578.61 kb)