. Load the CD with the labeled side up. . The disc is loaded in a different slot from that specified. . Eject the disc magazine and check the number for the specified disc. . The disc is severely scratched. . Try another disc instead. ? The specified track will not play. . Random play or magazine random play has been selected. . Turn off random play or magazine random play. ? Track repeat, disc and magazine random play start by themselves. . The setting is not canceled. . The settings for these functions or the disc ejected, even if changed. ? Cannot play CD-R or CD-RW. . Finalization processing is not being conducted . Conduct finalization processing with CD . A non-compatible CD changer is being used . Use a CD changer compatible with CD-R/CD-RW ? A CD ejects as soon as it is loaded. . The CD is upside-down. . Load the CD with the labeled side up. . The CD is quite dirty. . Clean the CD, referring to the section on (page 8). ? Can’t remove disc. . The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. . The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. ? The disc won’t insert. . There’s already another disc inserted. . Press the [ 0] button and remove the disc. ? Direct Track Search and Direct Album Search can’t be done. . Another function is ON. . Turn Random Play or other functions OFF. ? Track Search can't be done. . For the albums first or last song. . For each album, Track Search can't be done in the backward direction for the first song or in the forward direction for the last song. — 33 — English English MP3 source ? Can’t enter Album Select ? Cannot play an MP3. . Not conforming to ISO 9660 . Use a medium conforming Romeo. . The MP3 has no or invalid track . Add the ".MP3" extension to the MP3 . The media is scratched or dirty. . Clean the media, referring to the section 8). ? Noise or no sound generated when an MP3 is . The track has the MP3 track name extension while . Do not use the ".MP3" extension in non-MP3. ? Takes time before the unit starts playing MP3. . The medium contains many albums, tracks, and hierarchical . The unit checks all tracks on the loaded medium first. If the medium has many tracks recorded, it may take a long time for the unit before it starts playing MP3. ? Fails to play MP3 in the intended order. . The MP3 tracks were not written by the CD writer in the order in which you wanted them to be played. . Depending on the CD writer, you may be able to set the order in which MP3 tracks are to be played by writing them onto a medium with their track names beginning with play sequence numbers such as "01" to "99". ? The sound skips when an MP3 is being played. . The media is scratched or dirty. . Clean the media, referring to the section on (page 8). . The recording condition is bad. . Record the media again or use another media. ? Can't display the ID3 tag information correctly. . Record is not made in conformity with the ID 3 tag version1.x. . Record in conformity with the ID 3 tag version1.x. . There’s no folder recorded . Use a media with levels. ? The songs in the selected played in Album Select mode. . There are no MP3 in the selected . Make sure there’s recorded content in the MP3 media. ? The MP3 track/album search takes time. . Many tracks are recorded on the media. . When the media directory is complex, the track/take time. ? The MP3 related text isn’t displayed correctly. . A character is entered that this unit can't display. . For the characters that can be used for MP3 text entry, refer to (page 6). ? The MP3 track time isn’t displayed correctly. . There are times when it isn’t displayed correctly according to the MP3 recording conditions. If the following situations, consult your nearest service center: • Even though the disc changer is connected, the Disc Changer source is not ON, with "AUX" showing in the display during the Changer Mode. • Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the Auxiliary input is entered when switching modes. — 34 — The messages condition. The messages condition. : No disc magazine has The disc magazine is not . Load the disc magazine properly. No CD in the unit. . Insert the CD. No Disc/NO DISC: No disc has been loaded in the disc magazine. . Load a disc into the disc magazine. TOC ER: No disc has been loaded in the disc magazine. . Load a disc into the disc magazine. The CD is quite dirty. The CD is upside-down. The CD is scratched a lot. . Clean the CD and load it correctly. E-05: The CD is upside-down. . Load the CD correctly. BLANK: Nothing has been recorded on the MD. NO TRACK: No tracks are recorded on the MD, although it has a title. E-15: Media was played that doesn’t have data recorded that the unit can play. . Use media that has data r...
)
