valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
Then start playback and gradually increase the volume to a comfortable listening level. Do not play the CD at loud volume levels that might prevent you from hearing warning sounds such as car horns, etc. 6 HD8197_061807.p65 6 18/6/2007, 16:02 LOCATION OF CONTROLS AND INDICATORS 2 3 4 5 9 10 11 12 13 14 15 6 7 1 8 7 HD8197_061807.p65 7 18/6/2007, 16:02 1.) CD Door. 2.) Battery Compartment (Inside CD compartment). 3.) DC 4.5V Input Jack – Connect an AC adapter (not included) to this jack to use 120V 60Hz AC house current. 4.) HOLD (On/Off) Switch – Slide to the right to lock the function of the control buttons. 5.) EQ Button – Press repeatedly to select POP, ROCK, SRR (Surround), Flat EQs. 6.) Open “ ” Switch – Slide to the right to unlock and open the CD door. 7.) VOLUME + / – Buttons – Raises or lowers the volume. 8.) Headphone Jack – Connect stereo headphones, included, to this jack. 9.) MODE Button – To select the playback mode: Repeat 1/ALL, INTRO or SHUF (Shuffle). 10.) PROG (Program) Button – To program the playback tracks. 11.) SKIP/SEARCH Forward Button. 12.) SKIP/SEARCH Reverse Button. 13.) STOP Button. 14.) PLAY/PAUSE Button. 15.) LCD Display – Shows Track number, Elapsed Time, EQs, Program, Repeat, Shuffle, and Intro modes. 8 HD8197_061807.p65 8 18/6/2007, 16:02 LCD DISPLAY INDICATORS LCD DISPLAY INDICATORS 3 456 11 10 7 2 8 9 1 1.) PGM (Program) Indicator – Appears when programming tracks or playing programmed tracks. 2.) ROCK, SRR (Surround), POP Indicators – Appears when repeatedly pressing the EQ button to select the corresponding EQ setting. 3.) VOL Indicator – Appears when pressing the VOLUME + or – buttons to adjust the volume level. 4.) 1/ALL Indicators – Appears when the Repeat playback mode is selected. 5.) INTRO Indicator – Appears when Intro playback mode is selected. 6.) SHUF (Shuffle) Indicator – Appears when Random playback mode is selected. 7.) ASP Indicator – Indicates Anti-Skip Protection is activated. 8.) HOLD Indicator – Appears when HOLD switch is set to ‘On’position. 9.) Battery Status Indicator – Flashes when battery level becomes low. 10.) Elapsed Time Display. 11.) Track Number Display. 9 HD8197_061807.p65 9 18/6/2007, 16:02 OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS General Controls HOLD Switch The HOLD switch on the right side of the cabinet must be in the ‘Off’ (left) position to start the CD player. If you plan to carry the CD player in a handbag, briefcase, school bag, back pack, etc, slide the HOLD switch to the ‘On’ (right) position. While the HOLD switch is ‘On’, all the control buttons are disabled. This prevents the player from starting accidentally by something pressing against the PLAY/PAUSE button. HOLD (Off After you begin CD playback you may also slide the HOLD switch to the ‘On’ (right) position to disable all the controls on the CD door. You can then place the player in a handbag, backpack, etc, and do not have to worry that the player will be accidentally turned off by something pressing against the STOP button or Track Skip buttons. EQ (Preset Equalizer) Button During CD playback you may press the EQ button to select the preset equalizer setting ROCK, SRR, POP, Flat (EQ ‘Off’) as desired. VOLUME + / – Buttons Press the VOLUME + or – buttons to adjust the volume level. The VOL indicator will appear on the display. The level indicator ranges from “00”(Minimum) to “31”(Maximum) 10 HD8197_061807.p65 10 18/6/2007, 16:02 Electronic Anti-Skip Protection This CD player is equipped with automatic 60 second Electronic Anti-Skip Protection and that will eliminate virtually all skipping during most active uses. When you press the PLAY/PAUSE button to begin playback, the player immediately begins to store 60 seconds of music in a solid state memory that is impervious to shock. The player is always reading the disc 60 seconds ahead of the music you are hearing and storing that information in the memory. If the player is subjected to shock or bumps of less than 60 seconds duration you will not notice them at all. If the bumps last longer than 60 seconds the anti-skip memory may be depleted and the player may skip or stop. When playback begins the ASP indicator begins ‘flashing’ in the display. When the ASP indicator remains ‘On’, the Anti-Skip memory is ‘Full’ and contains 60 seconds of music. If the player is bumped or shaken the ASP indicator will flash again as the memory is depleted. The player may skip if the bumps continue. When the bumps stop the memory starts to fill up again and the ASP indicator remains ‘On’. 11 HD8197_061807.p65 11 18/6/2007, 16:02 Normal CD Playback • Make sure you have installed the batteries. • Make sure the HOLD switch is set to the ‘Off’ (left) position. • Press the “VOLUME –” button to a low volume setting before you put on the headphones. 1.) Slide the CD door Open “ ”switch to the right to unlock and open the CD door. 2.) Place your CD on the center spindle with the printed label side facing up. Press downward on the disc near the...
Questo manuale è adatto anche per i modelli :Lettori - HD8197 (339.51 kb)
Lettori - HD8197RD (339.51 kb)