valutazioni - 2, GPA: 3.5 ( )

Produttore : Philips File Size : 814.3 kb File Nome : Lingua di insegnamento:

Notes:–Old and new or different types of batteries should not be combined. –Remove batteries if they are empty or if the player is not going to be used for a long time. Inserting batteries 1 Push OPEN 2 to open the CD lid. 2 Open the battery compartment and insert either 2 normal or alkaline batteries, or the rechargeable NiMH battery AY3362 (if supplied). Battery indication The approximate power level of your batteries is shown in the display. Battery full Battery two-third full Battery one-third full Battery dead or empty. When the batteries are dead or empty, the symbol flashes, bAtt is displayed, and the beep tone sounds repeatedly. Average playing time of batteries under normal conditions Battery type ESP on Power Save Normal AX 21XX 5 hours 6 hours AX 51XX 5 hours 6 hours Alkaline AX 21XX 20 hours 22 hours AX 51XX 22 hours 25 hours Rechargeable ECO-PLUS NiMH battery 9 hours 10 hours Batteries contain chemical substances, so they should be disposed of properly. POWER SUPPLY / GENERAL INFORMATION ECO-PLUS NiMH battery information (for versions supplied with the rechargeable ECO-PLUS NiMH battery AY 3362) Recharging works only on players supplied with the rechargeable ECO-PLUS NiMH battery AY 3362. Recharging the ECO-PLUS NiMH battery on board 1 Insert the rechargeable ECO-PLUS NiMH battery AY 3362. 2 Connect the mains adapter to the 4.5V DC socket of the player and then to the wall socket. y is pulsing. • Recharging stops after a maximum of 7 hours, or when you start playback. 3 When the battery is fully recharged, and FULL appear briefly in the display, before the display switches off. Notes: – It is normal for the batteries during recharging. –If the approximately 30 minutes andHotis displayed. –To ensure clean. –Use only the ECO-PLUS NiMH battery AY 3362. Handling instructions • Recharging already charged or half-charged batteries will shorten their lifetime. We therefore recommend that you let the rechargeable ECO-PLUS NiMH battery run till it is completely empty before you recharge it. • To avoid a short circuit, do not let the battery touch any metal object. • If the battery becomes empty soon after recharging, then either its contacts are dirty or it has reached the end of its lifetime. Mains adapter (supplied or optionally available) Use only the AY 3170 adapter (4.5 V / 300 mA direct current, positive pole to the center pin). Any other product may damage the player. 1 Make sure the local voltage corresponds to the power adapter’s voltage. 2 Connect the power adapter to the 4.5V DC socket of the player and to the wall socket. Note: Always disconnect Belt Clip (not on all versions) 1 To attach the belt clip to the CD-player, position the shaped grip (found on the back of the belt clip) so BELT CLIP that it fits into the belt clip hole of the CD-player. 2 Turn the clip to LOCK as indicated on the set. 3 To detach, gently lift the belt clip and turn to RELEASE as indicated on the set. LOCK RELEASE LIFT Environmental information • All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into two mono materials: cardboard (box) and polyethylene (bags, protective foam sheet). • Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment. GENERAL INFORMATION • Do not touch the lens Aof...

Scarica la tua

Per scaricare, digitare 2 cifre :