valutazioni - 5, GPA: 4.2
(
)
)
|
Facilità d'uso
1Press the PLAY/PAUSE key. ¶ The power will be switched on and playback will commence. ¶ The same operation can be performed by pressing the PLAY/on the remote controller. ¶ The files will be played back in the sequence in which they were (written). ¶ The mark will be displayed when a folder exists in the next layer. ¶ The mark will be displayed when a file exists in the next layer. 2Turn the VOLUME knob to adjust the volume. Stopping Press the STOP button. ¶ The same operation can be performed by pressing the STOP 7 button on the re- mote controller. Searching for the beginning of files Press the 44444or ..... keys. ¶ The beginning of the required file will be located in accordance with the number of times the keys are pressed. Keep the key pressed down to skip consecutively through the files to be played back. ¶ If the 4 key is pressed once during playback, playback will return to the beginning of the file. ¶ A certain amount of time may be required when searching for the beginning of files depending on the number of files and the situation of the folder layers. Pausing during playback Player only: Press the PLAY/PAUSE key during playback. ¶ The mode currently set will blink in the display area, and playback will be paused. ¶ Press the PLAY/PAUSE key once again to resume playback. Fast forward and fast reverse Note: Fast forwarding and fast reversing is not possible with MP3 and WMA files. Conceptual diagram of a media directory (EX.1) (EX.2) ROOT Second Third layer ROOTFolder File Folder File First layer Second layer Third layer Fourth layer First layer layer Playing back MP3 and WMA files Using the MODE key for operations It is possible to search and the display style with The following mode settings will key is pressed. Folder search (folder search/folder select) B.BOOST setting (boosts the bass tones) Playback mode setting Display setting End the procedure by pressing the MODE key. ¶ The B.BOOST setting and the playback mode setting are Refer to the explanations in the section of CDs. Searching for folders (during playback) Sequentially selects folders. 1Press the MODE key during playback to make the “ FOLDER” display blink. ¶ Perform the next operation within eight seconds. 2Press the ..... or 44444keys to select the required folder. . key: Selects the next folder in the sequence it was written. 4 key: Selects the previous folder in the sequence it was written. ¶ The folder name will be displayed inside parenthesis “( )”. ¶ Playback will automatically start from the first file in the folder once a folder has been selected. ¶ A certain amount of time may be required when searching for folders depend-ing on the number of files and the situation of the folder layers. ¶ The player will return to the first folder in which files exists when the STOP 7 key is pressed. Selecting folders (when stopped) Selects the folders to be played back directly regardless of the or-der in which it was written (operated from the player). 1Press the MODE key when stopped to make the“ FOLDER” display blink and press the PLAY/PAUSE key to enter the folder selection mode. ¶ The and marks will blink during folder selection. 2Press the ..... or 44444keys to select a folder in the same layer. . key: Selects the next folder in the same layer. 4 key: Selects the previous folder in the same layer. Press the ..... or 11111keys to move to the layer. . key: Moves to the lower layer. 1 key: Moves to the higher layer. ¶ The folder name will be displayed inside parenthesis “( )”. ¶ The mark will blink if another folder exists within the selected folder. The mark will blink if a file exists within the selected folder. ¶ Press the STOP 7 button to return to ROOT. 3Select the required folder, and the press the PLAY/PAUSE key. ¶ Playback will start from the first file in the selected folder. ¶ Files in the next folder will be played back when no files exist in the selected folder. ROOT : Press the 4/ . key. : Press the 1/ . key. Viewing the information contained in the media (Display setting) This function allows media information, such as the folder and file titles and the number of files contained on the media, to be viewed. 1Press the MODE key to enter the media display mode. ¶ The currently set mode will blink once the media display mode has been reached. ¶ Perform the following operation within eight seconds. 2Press the 44444or ..... keys to change the display. The display will switch between the following information whenever these keys are pressed. When stopped: During playback: Folder title ( ) Total number of files in the folder ( ) The total number of files on the media [ ] The name of the file being played back Title and artist information Folder title ( ) Number of the file being played back The amount of time elapsed for the file Battery consumption display The following black-display’s information display The timing for displaying the black-consumption level of the batteries Battery type Timing for displaying the black-and white...
Questo manuale è adatto anche per i modelli :Lettori - DPC-MP727 (282.7 kb)