valutazioni - 1, GPA: 5
(
)
)
|
Foto e specifiche Sony NW-E99 |
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
0:00 5 Rotate the Shuttle switch to adjust the “hour” setting and press the Nxbutton to confirm. The “minute” digit blinks. Adjusting the settings of your Network Walkman 1 Press the MENU button. The menu screen is displayed. REPEATMODE> 2 Rotate the Shuttle switch to select “DATE-TIME” and press the Nx button to confirm. The “year” digit blinks. 2004y 1m 1d 0:00 6 As you did in step 5, adjust the settings for “minute.” After rotating the Shuttle switch to adjust the “minute” setting and pressing the Nxbutton to confirm, the display switches to the time setting screen. DATE-TIME 7 Press the MENU button. The display returns to the normal screen. continued 27 Adjusting the current time setting (DATE-TIME) To cancel the Menu mode Select [RETURN] in the menu screen or press the MENU button. To display the current time Press the MENU button and hold it. You can display the current time while pressing the button. Notes • If the unit is not used for a long time, your settings of the date and time may be reset. • If the current time is not set, the display for the date and time will be “-- --.” • If PC CLK is set to “ON” (page 26), the time setting of your Network Walkman is automatically adjusted to a computer’s built-in clock when your Network Walkman is connected to the computer. • Depending on the shipping area, the time display format of the unit is set to a 12-hour display or a 24-hour display. You cannot switch between a 12-hour display and a 24-hour display in the unit. A 24-hour display is shown in this manual. Limiting the volume (AVLS) You can set AVLS (Automatic Volume Limiter System) to limit the maximum volume to prevent auditory disturbance or distraction. With AVLS, you can listen to music at a comfortable volume level. Gro pM de ode Nxbutton MENU button Press (Confirm) Shuttle switch to (+/>) to (./–) 1 Press the MENU button. The menu screen is displayed. REPEATMODE> 2 Rotate the Shuttle switch to select “AVLS” and press the Nxbutton to confirm. “OFF” blinks. AVLS :OFF 3 Rotate the Shuttle switch to select “ON” and press the Nxbutton to confirm. The (AVLS) indication is displayed. The volume is kept at a moderate level. 4 Press the MENU button. To change the setting to “OFF” Select “OFF” in step 3. To cancel the Menu mode Select [RETURN] in the menu screen or press the MENU button. Setting the volume using the preset volume function There are two modes to adjust the volume level. Manual mode: Press the VOLUME +/– button to adjust the volume level in the range of 0 to 31. Preset mode: Press the VOLUME +/– button to set the volume level to any of three preset levels: LO, MID, or HI. VOLUME +/– button MENU button ode Nxbutton Press (Confirm) Shuttle switch to (+/>) to (./–) Setting a volume level of the preset mode 1 Press the MENU button. The menu screen is displayed. Adjusting the settings of your Network Walkman REPEATMODE> 2 Rotate the Shuttle switch to select “VOL: MAN.” VOL :MAN continued 29 Setting the volume using the preset volume function 3 Press the Nxbutton to confirm. “MAN” blinks. 4 Rotate the Shuttle switch to select “SET >.” VOL :SET> 5 Press the Nxbutton to confirm. “VOL LO xx”* blinks. * “xx” stands for numeric values of the volume level. VOL LO xx To cancel the Menu mode Select [RETURN] in the menu screen or press the MENU button. Note If AVLS (page 28) is set, the actual volume may be lower than the settings. Releasing AVLS returns the volume to the preset level. Switching to the manual mode 1 Press the MENU button. The menu screen is displayed. 2 Rotate the Shuttle switch to select “VOL: SET.” 6 Set volume levels of three preset levels: LO, MID, or HI. 1Press the VOLUME +/– button to set the volume level of the LO preset. 2Rotate the Shuttle switch to select “VOL MID xx,” and then press the VOLUME +/– button to set the volume level of the MID preset. 3Rotate the Shuttle switch to select “VOL HI xx,” and then press the VOLUME +/– button to set the volume level of the HI preset. 7 Press the Nxbutton to confirm. 8 Press the MENU button. The display returns to the normal screen. With these settings, you can adjust the volume level to any of three preset levels: LO, MID, or HI. VOL :SET> 3 Press the Nx button to confirm. “SET >” blinks. 4 Rotate the Shuttle switch to select “MAN.” VOL :MAN 5 Press the Nxbutton to confirm. 6 Press the MENU button. The display returns to the normal screen. With this setting, you can adjust the volume level by pressing the VOLUME +/– button. To change the setting to “ON” Select “ON” in step 3. Turning off the beep sound (BEEP) To cancel the Menu mode Select [RETURN] in the menu screen, or press the You can turn off the beep sounds of your MENU button. Network Walkman. Gro pM de ode Nxbutton MENU button Press (Confirm) Shuttle switch to (+/>) to (./–) 1 Press the MENU button. The menu screen is displayed. REPEATMODE> 2 Rotate the Shuttle switch to select “BEEP:” and press the Nx button to confirm. “ON” blinks. BEEP:ON 3 Rotate the Shuttle switch to select ...
Questo manuale è adatto anche per i modelli :Lettori - NW-E95 (681.04 kb)