valutazioni - 3, GPA: 3.7
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Preparing the required system The following system environment is required. Computer IBM PC/AT or Compatible • CPU: Pentium II 400 MHz or higher (Pentium III 450 MHz or higher is recommended.) • Hard disk drive space: 200 MB or more (1.5 GB or more is recommended.) (The amount of space will vary according to the Windows version and the number of music files stored on the hard disk.) • RAM: 64 MB or more (128 MB or more is recommended.) Others • CD drive (capable of digital playback by WDM) • Sound Board • USB port (Hi-Speed USB is supported.) Operating System Factory installed: Windows XP Media Center Edition 2004/Windows XP Media Center Edition/ Windows XP Professional/Windows XP Home Edition/Windows 2000 Professional/ Windows Millennium Edition/Windows 98 Second Edition Display High Color (16 bit) or higher, 800 . 600 dots or better (1024 . 768 dots or better is recommended.) Others • Internet access: for Web registration, EMD services and CDDB • Windows Media Player (version 7.0 or higher) installed for playing WMA fi les Notes • SonicStage is not supported by the following environments: – Operating systems other than those the indicated above – Personally constructed PCs or operating systems – An environment that is an upgrade of the original manufacturer-installed operating system – Multi-boot environment – Multi-monitor environment – Macintosh • We do not guarantee trouble-free operation on all computers that satisfy the system requirement. • The NTFS format of Windows XP/Windows 2000 Professional can be used only with the standard (factory) settings. • For Windows 2000 Professional users, install Service Pack 3 or later version before using the software. • We do not guarantee trouble-free operation of the system suspend, sleep, or hibernation function on the computers. Installing SonicStage Check the following before installing the SonicStage software. • Make sure to close all other software, including any virus-check software, as such software usually demands a large amount of system resources. • Make sure to use the supplied CD-ROM for installing SonicStage. – If OpenMG Jukebox or SonicStage has been installed, the existing software will be overwritten by the new version with the new functions. – If SonicStage Premium, SonicStage Simple Burner, or MD Simple Burner has been installed, the existing software will co-exist with SonicStage. – You will still be able to use audio data registered by the existing software. As a precaution, we recommend that you back up your audio data. To back up the data, refer to “Backing Up My Library” – “Backing Up Data to a Disk” on SonicStage Help. 1 Turn on your computer and start up Windows. 2 Insert the supplied CD-ROM into the CD drive of your computer. The setup program starts up automatically and the installation window appears. Depending on the region, a window may appear asking you to select your country. In this case, follow the displayed instructions. 3 Click “Install SonicStage,” and then follow the displayed instructions. “Install SonicStage” Read the instructions carefully. Depending on your region, the buttons other than “Install SonicStage” may differ from those in the illustration above. The installation may take 20 to 30 minutes, depending on your system environment. Make sure to restart your computer only after the installation is completed. If any trouble occurs during the installation, see “Troubleshooting” (. page 39). Note on uninstalling “OpenMG Secure Module” is installed when you install SonicStage. If you uninstall SonicStage, do not delete OpenMG Secure Module since it may be used by other software. Getting Started Playback Playback Before Playback The following procedures using the SonicStage installed on your computer are necessary before playback. • Importing tracks (audio data), which you want to listen to with the player, to your computer (.right) • Transferring audio data from your computer to the player (.page 14) Playable audio data This player can play audio data compressed in the ATRAC3plus/ATRAC3 formats. ATRAC3 (Adaptive Transform Acoustic Coding3) is an audio compression technology that satisfies the demand for high sound quality and high compression rates. ATRAC3plus is developed from the ATRAC3 format and can compress audio files to about 1/20 of their original size at 64 kbps. Importing audio data to your computer Record and store tracks (audio data) from an audio CD to the SonicStage “ My Library” on the hard disk drive of your computer. You can record or import tracks from other sources such as the Internet and your computer’s hard disk. Refer to SonicStage Help for details (.page 16). “Music Source” Source indication “Format/Bit Rate” “CD Info” 1 Select “Start” – “All Programs”* – “SonicStage” – “SonicStage.” SonicStage starts up. If you use the earlier version of SonicStage, the “SonicStage fi le conversion tool”** window appears when you start up SonicStage for the fi rst time after installing it. Follow the instructions...