valutazioni - 3, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
• When using a 1GB Hi-MD disc, the continuous recording time may be shortened if you repeatedly make short recordings. • When you use the radio, it is recommended that you use a fully charged rechargeable battery since more power is consumed by the When playing continuously radio than by MiniDisc playback. Hi-MD mode (When using a 1GB Hi- MD disc) (Unit: approx.hours)(JEITA) Batteries Linear PCM Hi-SP Hi-LP NH-7WMAA 4.5 7.5 9 LR6 11 18.5 21.5 Hi-MD mode (When using a 60/74/80minute standard disc) (Unit: approx.hours)(JEITA) Batteries Linear PCM Hi-SP Hi-LP NH-7WMAA 4 7.5 9 LR6 9.5 17 20 MD mode (Unit: approx.hours)(JEITA) Batteries SP LP2 LP4 Stereo Stereo Stereo NH-7WMAA 7.5 9 10 LR6 20.5 24 26 When using the radio (Unit: approx.hours)(JEITA) Batteries FM/AM NH-7WMAA 7.5 LR6 18.5 Recording a disc right away! This section explains the basic procedure for making digital recordings using an optical cable connected to a CD player, Digital TV or other digital equipment. Make sure to use the optical cable. Note that you cannot record a radio broadcast that is being received on the remote control. 1 Make connections. (Insert the cables firmly and completely into the appropriate jacks.) 1 Connect the AC power adaptor to the 2 Connect the optical cable to the recorder and a house current. To a wall outlet To DC IN 3V To LINE IN (OPT) Optical plug AC power adaptor To a digital (optical) out jack Optical cable* recorder and an external component. CD player, MD player, DVD video player, etc. Optical mini- plug . See “Optional accessories” (page 83). Note Make sure to disconnect the dedicated USB cable before recording. continued 2 Insert a recordable disc. 1 Slide OPEN to open the lid. 2 Insert a disc with the label side facing front, and press the lid down to close. Make sure to check the record-protect tab is closed. 3 Confirm the operation mode. This recorder has two operation modes, “Hi-MD mode” and “MD mode”. The operation mode is automatically recognized whenever the disc is inserted. After you insert a disc, check the operation mode on the display window of the recorder. “Hi-MD” lights up when the operation mode is Hi-MD and “MD” lights up when the operation mode is MD. • When using a 1GB Hi-MD disc, the operation mode will only be Hi-MD. • When using a standard disc (60/74/80 minutes), the operation mode can be set as follows. Disc condition Operation mode Blank disc The mode set for “Disc Mode” in the menu.1) The “Disc Mode” is factory set to “Hi-MD”. If you want to use the disc on another component that does not support Hi-MD, set the “Disc Mode” to “MD” to use the disc in MD mode. The disc contains material recorded in Hi-MD mode Hi-MD The disc contains material recorded in MD mode MD 1) Refer to “Selecting the disc mode (Disc Mode)” (page 73) for the “Disc Mode” setting. 4 Record a disc. 1 Select and pause the sound source to 2 Make sure that disc indication has be recorded. stopped rotating in the display window PAUSE Connected component 3 While the recorder is stopped, press and hold T MARK/REC and press NENT on the recorder. “REC” lights up and recording starts. T MARK/REC NENT on the recorder. Make sure that disc indication has stopped. 4 Play the source you want to record. If you insert a previously recorded disc, the recording starts after the existing contents. Track marks are automatically added at the same point as the sound source, and the contents are recorded together as a group. PAUSE Connected component To Press Stop Press x. Pause Press X1). Press X again to resume recording. Remove the disc Press x and open the lid. (The lid does not open while “SYSTEM FILE WRITING” flashing in the display.) 1) A track mark is added at the point where you press X again to resume recording while pausing; thus the remainder of the track will be counted as a new track. If the recording does not start • Make sure the recorder is not locked (pages 12, 16). • Make sure the disc is not record-protected (pages 20, 81). • Premastered discs cannot be recorded over. Notes • When you record on a 1GB Hi-MD disc, connect the AC power adaptor to the recorder, charge the rechargeable battery fully (battery level indication shows ), oruse anew alkaline dry battery (battery level indication shows ). When you attempt to start recording on a 1GB Hi-MD disc, “NotENOUGH POWER TO REC” may appear and recording cannot be done even if the battery level indication shows sufficient remaining power while the recorder is stopped or playing. This is because of a mechanism that disables recording when the remaining battery power is estimated by the recorder to be insufficient due to the high power consumption required for 1GB Hi-MD disc recording. • Before making a recording while using the AC power adaptor, always insert a fully charged rechargeable battery or a new alkaline dry battery into the recorder first to ensure that the recording operation completes successfully. • Make sure to place the recorder at a stable, vibration-free plac...