valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
HOLD switch Slide the HOLD switch in the direction of the arrow. No controls will be able to operate. If you press buttons while the HOLD switch is ON, “HOLD” appears in the display. To release the Hold function Slide the HOLD switch in the opposite direction of the arrow. Changing the settings MENU button VOLUME +/– buttons Seesaw key Press (b) Press (B) Press (PUSH) To set a reasonable volume (Volume preset functions) There are two modes of adjusting the volume. Manual mode: By pressing the “VOLUME +/–” button, you can change the setting from 0 to 31. Preset mode: You can switch to any of three preset levels: LO, MID, or HI . 1 Press the MENU button. The menu is displayed. REP :OFF 2 Press b or B of the Seesaw key to display “VOL : MAN.” VOL : MAN 3 Press (PUSH) of the Seesaw key. “MAN” blinks. 4 Press b or B of the Seesaw key to display “VOL : SET>.” VOL : SET> 5 Press (PUSH) of the Seesaw key. “VOL LO xx”* blinks. * xx is a numeric value. VOL LO xx 6 Press the “VOLUME +/–” button to set the settings of LO, MID, or HI. 1 Sets numeric of LO. 2 Press B to display “VOL MID xx,” and set it using “+/–.” 3 Do the same to set “VOL HI xx.” 7 Press (PUSH) of the Seesaw key. 8 Press the MENU button. The display returns to normal. While the above settings, the volume can be adjusted to LO, MID, or HI. To exit from the Menu mode Select [RETURN] in the menu or press the MENU button. Note If AVLS is set (page 14), the volume may be lower than previous settings. To turn off the beep sound (BEEP) BEEP ON: a beep will sound to indicate that operation has been accepted. BEEP OFF: no beep sound will be heard. 1 Press the MENU button. The menu is displayed. REP :OFF 2 Press b or B of the Seesaw key to display “BEEP : ON.” BEEP : ON 3 Press (PUSH) of the Seesaw key. “ON” blinks. 4 Press b or B of the Seesaw key to display “OFF.” BEEP : OFF 5 Press (PUSH) of the Seesaw key. 6 Press the MENU button. The display returns to normal. To exit from the Menu mode Select [RETURN] in the menu or press the MENU button. To turn on the beep sound Select ON in step 4. Advanced Operations continued Changing the settings (continued) To change the display backlight setting (LIGHT) Menu Backlight mode OFF always off ON turns on for three seconds after each operation (or until scrolling is complete) 1 Press the MENU button. The menu is displayed. REP :OFF 2 Press b or B of the Seesaw key to display “LIGHT : ON.” LIGHT:ON 3 Press (PUSH) of the Seesaw key. “ON” blinks. 4 Press b or B of the Seesaw key to display selections. LI GHT : OFF 5 Press (PUSH) of the Seesaw key. 6 Press the MENU button. The display returns to normal. To exit from the Menu mode Select [RETURN] in the menu or press the MENU button. To set the date and time (DATE – TIME) You can set the current date and time and display it. To play a music item with a playback period restriction, you need to set the date and time. 1 Press the MENU button. The menu is displayed. REP :OFF 2 Press b or B of the Seesaw key to display “DATE–TIME.” DATE–T IME 3 Press (PUSH) of the Seesaw key. The “DATE” display appears, and the year digits blink. 00 y 1m 1 d 4 Press b or B of the Seesaw key to select the year digits. 5 Press (PUSH) of the Seesaw key. The month digit blinks. 00y 1m 1d 6 Do the same to set the month “m” and the day “d,” and press (PUSH) of the Seesaw key. The “TIME” display appears, The hour digit blinks. 0: 0 0 7 Do the same to set the hour and minute, and press (PUSH) of the Seesaw key. 8 Press the MENU button. The display returns to normal. To switch between 24 hour display and 12 hour display Press the DISPLAY button during the setting in step 7. To exit from the Menu mode Select [RETURN] in the menu or press the MENU button. To display the current time Press the DISPLAY button more than one-half second. You can display the current time during pressing. Note If the unit is not used for a long time, it may reset your settings of the date and time. Advanced Operations To erase music data from the “Memory Stick” (ERASE) You can erase music data from the “Memory Stick” one by one. Confirm the contents before erasing. 1 Press the MENU button. The menu is displayed. REP :OFF 2 Press b or B of the Seesaw key to display “ERASE.” 6 Press b or B of the Seesaw key to display “Y.” ERASE:Y> 7 Press (PUSH) of the Seesaw key. “ERASE 001?” appears. 8 Press (PUSH) of the Seesaw key. “ERASING” appears, and music data is erased from the “Memory Stick.” After erasing is complete, “COMPLETE” appears, and returns to the display in step 2. 9 Press the MENU button. The display returns to normal. ERASE> If “ERASE” does not appear in the menu, erasing is not available. 3 Press (PUSH) of the Seesaw key. The current track number blinks. ERASE : 0 0 1 4 Press b or B of the Seesaw key to select the track numbers you want to erase. 5 Press (PUSH) of the Seesaw key. “N” blinks. Playback starts from the first track. If you do not operate it for more than 10 seconds while in playback mode, erasing automatically ...