valutazioni - 4, GPA: 4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
2) To check the SonicStage software version, go to [Menu] -[About SonicStage] in the SonicStage window, or see the version information on the supplied CD-ROM. If your computer does not recognize the Net MD • Is the Net MD connected correctly to your computer? — If the Net MD is not firmly connected to the computer, the Net MD will not be recognized by your computer. — Reconnect the dedicated USB cable. If the computer still does not recognize the Net MD, disconnect the Net MD, restart the computer, and connect the dedicated USB cable again. • Is an MD inserted in the Net MD? Check if an MD is inserted in the Net MD. • If your computer does not recognize your Net MD even when the Net MD is connected and a disc is inserted, the Net MD driver may not be correctly installed. Go to the [USB Controller] in the Windows Device Manager window to verify that your Net MD is correctly recognized. A [!] mark in the Device Manager window indicates that your Net MD is not correctly recognized. Reinstall the Net MD driver. 1 Click [Start]–[Settings]–[Control Panel].1) 2 Double click [System] in the control panel.2) 3 Click the [Hardware]3) tab, and then click [Device Manager]. The Device Manager window appears. 1) In Windows XP, select [Start]–[Control Panel]. 2) In Windows XP, double click [System] if the control panel is in the “classic” format, or click [Performance and Maintenance] and then [System] if the control panel is in the “category” format. 3) Depending on your system, the [Hardware] tab may not be provided. In this case, click the [Device Manager] tab to display the Device Manager window. If the installation was not successful • Be sure to close all Windows applications before you start the installation. If you start the installation while other programs are running, a malfunction may occur. This is especially true for programs that require large amounts of system resources, such as virus-check software. • Be sure not to connect the Net MD to your computer before you start the installation. If the dedicated USB cable is connected to your computer before the installation, the installation cannot be done correctly. Connect the dedicated USB cable after the installation completed. • Make sure your computer has enough hard disk drive space. 120MB of free space or more on the hard disk drive is required. If your computer does not have enough space, the installation may not be possible. • If the installation seems to be stopped It may take 30 minutes or more for the installation to complete, depending on your computer or CD-ROM drive. During the installation, watch out for the occurrence of any of the following problems. Problem Cause/Remedy The installation appears to have stopped before it has completed. Check for the appearance of an error message beneath the installation window. t Press the [Tab] key while holding down the [Alt] key. If an error message has appeared, press the [Enter] key. The installation will resume. If there is no message, the installation is still in progress. Wait a little while longer. The progress bar on the display is not moving. The access lamp has not lit for a few minutes. The installation is progressing normally. Please wait. • If the installation is still unsuccessful after all that you have done. — The installation can be done by copying all files to the hard disk as follows: 1 Create a new folder on the hard disc. 2 Insert the supplied CD-ROM (SonicStage Ver.1.5) into the CD-ROM drive. 3 When the installation window appears, click [Exit] to cancel the installation. 4 Right-click the start menu and start up Explorer. 5 Select [SS15E] on the CD-ROM drive, and then click [Edit] -[Select All]. 6 Click [Edit]-[Copy to Folder] (or [Edit]-[Copy]) to copy all files to the folder that you created in step 1. 7 Remove the CD-ROM from the CD-ROM drive, open the folder that was copied to the hard disk and double-click [setup.exe]. 8 When the installation window appears, follow the displayed instructions to install [SonicStage 1.5]. — The installation may be done by installing the software from [Start]-[Run]. Information and explanations Net MD FAQ This section introduces frequently asked questions and answers on the Net MD. On the Net MD What is a “Net MD”? Net MD is a specification that allows audio data in a computer to be transferred to a MiniDisc through a USB cable. Till now, MiniDiscs could be used to record only analog sources (through a microphone or analog input) or PCM sources such as CDs. Recording audio files on a computer was impossible. However, thanks to SonicStage and other music management software based on such copyright protection technology as “OpenMG”1) and “MagicGate”2), conversion of audio files to the ATRAC or ATRAC33) format used on MDs became possible, enabling the recording of computer files to MDs. 1) Copyright protection technology for managing audio data recorded on computers, etc. 2) Technology for verifying the copyright-protection status of audio data in check-...