valutazioni - 3, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Headphones or earphones For AM, reorient the CD player itself. Note Keep the headphones/earphones connected to the i jack of the CD player. The headphones/earphones cord works as the FM antenna. If it is hard to hear the FM broadcast 1 While listening to the radio, press and hold DISPLAY/MENU until the display changes. >AVLS MONO 2 Push the 5-way control key toward . or > to select “MONO,” then press DISPLAY/MENU. 3 Push the 5-way control key toward . or > to select “ON,” then press DISPLAY/MENU to enter the selection. The noise will be reduced but the radio will play in monaural. Protecting your hearing The AVLS (Automatic Volume Limiter System) function keeps the maximum volume down to protect your hearing. 1 While listening to the radio, press and hold DISPLAY/MENU until the display changes. 2 Push the 5-way control key toward . or > to select “AVLS,” then press DISPLAY/MENU. 3 Push the 5-way control key toward . or > to select “ON,” then press DISPLAY/MENU to enter the selection. To cancel the AVLS function Perform steps 1 - 3, changing the AVLS setting to “OFF.” Turning off the radio automatically You can set the radio to turn off automatically within a range of 10 to 99 minutes by 10 minutes. While the timer function is working, “ ” appears at about 5 second intervals. 1 While listening to the radio, press and hold DISPLAY/MENU until the display changes. 2 Push the 5-way control key toward . or > to select “TIMER,” then press DISPLAY/MENU. 3 Push the 5-way control key toward . or > to select the length of time you want to set from “10” to “99,” then press DISPLAY/MENU to enter the selection. To check the length of time before the radio is automatically turned off While listening to the radio, perform steps 1 2. To cancel the OFF TIMER function The OFF TIMER function for the radio will be canceled: • When you perform steps 1 - 3, changing the OFF TIMER setting to “OFF.” • When you turn off the radio. • When you start playing a CD. When listening to the radio on battery If you connect the external power source plug to the DC IN 3 V jack of your CD player, the CD player will turn off. Turn it on by pressing RADIO ON/BAND to continue listening to it. Presetting radio stations You can preset up to 40 stations: 30 for FM and 10 for AM. 1 Press RADIO ON/BAND to turn on the radio. 2 Press RADIO ON/BAND to select the band. 3 Press MEMORY for 2 seconds or more. The preset number will flash in the display. 87.50 MHz FM 01 Using the radio (Continued) 29 Presetting radio stations 4 Press DISPLAY/MENU for 2 seconds or more. The CD player starts scanning the stations from the lower frequencies and stops for about 3 seconds when a station is received. 5 If you want to preset the received station, press DISPLAY/MENU while the preset number is flashing. The received station is preset on the preset number 1 and the CD player starts scanning for the next receivable station. If you do not press DISPLAY/MENU within the 3 seconds, the CD player will start scanning for the next receivable station without storing the station. 6 Repeat step 5 until all receivable stations are preset. If the stations have already been stored, the newly preset stations will replace the old ones. Presetting stations manually 1 Press RADIO ON/BAND to turn on the radio. 2 Press RADIO ON/BAND to select the band. 3 Press and hold MEMORY until the preset number flashes in the display. 87.50 MHz FM 01 From this step on, start the next operation within 30 seconds after you finished the previous operation. If 30 seconds pass with nothing done, the preset number stops flashing which shows that the CD player has exited the preset memory standby mode. If this happens, start from step 3 again. 4 Push the 5-way control key toward . or > repeatedly to select the preset number you want to store the station on while the preset number flashes. 5 Press TUNE + or – ( + or – for the remote control) to tune in the station you want while the preset number flashes. 6 Press DISPLAY/MENU. When the station is preset successfully, the beep sounds. The new station replaces the old one. The preset number increases by one and the CD player enters the preset memory standby mode. 7 Repeat steps 4 to 6 when you preset the stations in the same band. When you preset the stations in the different band, press and hold MEMORY to exit the preset memory standby mode. Repeat steps 2 to 6 after the preset number stops flashing. To exit the preset memory standby mode When the radio is turned on, you can exit the preset memory standby mode using one of the following procedures. Preset stations, however, will remain stored in the CD player’s memory. • Hold down MEMORY until the preset number stops flashing. • Do not press any button for 30 seconds. The preset number stops flashing. • Push the 5-way control key toward u. The CD player enters the CD playing mode. • Push the 5-way control key toward x/ CHG. The radio turns off. To cancel all preset stations 1 While the radio is turned off and ...