valutazioni - 4, GPA: 3.8
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
You can use the HOLD function with both the CD player and the remote control. You can still operate your CD player using the remote control when HOLD on the remote control is set to off. To unlock the controls Slide HOLD in the direction opposite to that of the arrow. Note Even if the HOLD function is working, “HOLD” will not appear in the display of the remote control. Available features 23 Turning off the beep sound You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player. 1 Press DISPLAY until the display changes. 2 Flick the jog lever toward . or > to select “BEEP,” then press the jog lever to enter the selection. 3 Flick the jog lever toward . or > to select “OFF,” then press the jog lever to enter the selection. To turn on the beep sound Perform steps 1 - 3, changing the BEEP setting to “ON.” Saving power You can select lighting options for the LCD backlight on the remote control and the OPERATION lamp on the CD player so that you can save battery power. 1 Press DISPLAY until the display changes. 2 Flick the jog lever toward . or > to select “LIGHT,” then press the jog lever to enter the selection. 3 Flick the jog lever toward . or > to select “LIGHT OFF” or “LIGHT 2,” then press the jog lever to enter the selection. About the LIGHT setting Setting OPERATION lamp on the CD player LCD backlight on the remote control LIGHT Turned off Turned off OFF LIGHT 1 Lights up fully during play or during operation Lights up for about 5 seconds when you press a button and also lights up between tracks LIGHT 2* Lights up with less brightness during play or during operation Lights up for about 5 seconds when you press a button *You can save power by selecting “LIGHT 2” rather than “LIGHT 1.” The LCD backlight on the remote control The LCD backlight is always turned on when you are using the AC power adaptor. Playing tracks continuously (SEAMLESS) (ATRAC CD only) You can play live concert music, etc. without space between the tracks. 1 While play is stopped, press DISPLAY until the display changes. 2 Flick the jog lever toward . or > to select “SEAMLESS,” then press the jog lever to enter the selection. 3 Flick the jog lever toward . or > to select “ON,” then press the jog lever to enter the selection. Note The tracks may not play continuously depending on how the source music was recorded. Available features 25 B Connecting your CD player Connecting a stereo system You can listen to CDs through a stereo system and record CDs on a cassette tape or a MiniDisc. For details, see the instruction manual that comes with the device you want to connect. Be sure to turn off all devices before making connections. to i/LINE OUT (OPTICAL) Optical digital connecting cord Connecting cord (minijack) Left (white) Right (red) Stereo system, cassette recorder, radio cassette recorder, etc. 1 While play is stopped, press DISPLAY until the display changes. 2 Flick the jog lever toward . or > to select “AUDIO OUT,” then press the jog lever to enter the selection. 3 Flick the jog lever toward . or > to select the setting appropriate for the connected device, then press the jog lever to enter the selection. Connected device* Setting Headphones “HP” Device connected using “LINE” the connecting cord * When you connect the device using the optical digital connecting cord, you do not have to choose the setting. The setting will be switched to that for an optical connection automatically. Notes • When using the optical digital connecting cord, you cannot check the track number, etc. on this CD player. Check the display of the connected device. • Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speakers. • Use the AC power adaptor for recording. If you use the rechargeable battery or dry battery as a power source, the battery may become completely depleted during recording. • Adjust the volume properly on the connected device so that the sound will not be distorted. • This CD player uses the Serial Copy Management System, which allows only first- generation digital copies to be made. • When recording or playing an ATRAC CD/MP3 CD using a connected device, use only the analog connecting cord. • If you change the connected device, make sure to change the “AUDIO OUT” setting. MiniDisc recorder, DAT deck, etc. When the headphones or other devices are connected to the i/LINE OUT (OPTICAL) jack When an optical digital connecting cord is connected, the output is automatically switched to an optical digital output. When a remote control or a connecting cord is connected: The current AUDIO OUT setting (“HP” or “LINE”) flashes for about 5 seconds. If you connect another device to the i/LINE OUT (OPTICAL) jack, first remove the device and connect the headphones again, then switch the AUDIO OUT setting to “HP.” When AUDIO OUT is set to “LINE” You cannot adjust the volume using VOL +/– on the CD player or the remote control. When using an optical digital conn...