valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
• DMP-210/220 Player • Drivers and Software on CD-ROM • Earphone • USB Cable • User’s Manual • Quick Install Guide • 1 x AA Alkaline Battery Driver and Manager Installation The driver enables the Manager software to communicate with the DMP-210/220. When you install the Manager software, the drivers will automatically be copied to the Windows system directory. ! Note: Install the Manager program before connecting your DMP-210/220 to the USB port. The Manager program loads the appropriate drivers necessary to complete the installation. If the device is connected before installing the Manager program, disconnect the DMP-210/220 from the USB port, exit the “Add New Hardware Wizard” screen and restart your computer. Driver and Manager Installation Continued… • Make sure your computer is turned on. • Insert the DMP-210/220 Driver CD into the CD-ROM. • The Autorun screen will appear automatically. • Click on the button labeled “Install Manager” Note: If the Autorun screen does not appear, click on Start and select Run. In the run dialog box, type "drive:\autorun.exe" and click OK. Where “drive” is the letter of your CD-ROM drive. • Follow the on-screen instructions to complete the Manager installation. • Reboot the computer. Connect the DMP-210/220 to the PC • Open the battery compartment and insert the battery supplied with this package. Be sure to match the correct polarity. • Press the Play button to turn on the DMP-210/220. The DMP-210/220 must be powered on before connecting to the computer via the USB port. • Connect the type “A” end of the USB cable to the USB port on your computer. (This is the flatter, rectangular end of the USB cable) • Connect the other end of the USB connector on the DMP-210/220. (This is the smaller, square end of the USB cable) • Windows will detect and load all necessary drivers when the DMP-210/220 is connected to the USB port for the first time. Note: Windows 2000 users may be prompted by a “Digital Signature Not Found” screen. Click “Yes” on each screen to allow the installation to continue. Downloading Music to the DMP-210/220 • Start the Manager program by clicking on: Start > Programs > D-Link MP3 > D-Link MP3 Manager • The following screen will appear • On the Left side, select the Drive and Folder of your MP3 files. • Select the MP3 files you wish to download to the DMP-210/220. • Press the Send to DMP-210/220 button to download the selected MP3 files to the DMP-210/220. • Once the download is successful, the Flash Memory section will refresh and show the songs currently downloaded to the DMP-210/220. Downloading Music to the DMP-210/220 Continued… • You may also upgrade the available memory by inserting a SmartMedia Card. SmartMedia Cards are available at most electronic stores. Refer to the User’s Manual for more information. • When using SmartMedia Cards, you will need to click the select button to download music to the SmartMedia memory. • Pressing the Update button will refresh the view of which files are downloaded to the DMP-210/220. Additional information and instructions are provided in the User’s Manual. Playing Music on the DMP-210/220 Please refer to the following illustration for feature and button location. 1. Connect the supplied earphones to the earphone jack of the player. 2. Press the Play/Pause button to start playback. Playback starts from the MP3 file that you played the last time you used the DMP-210/220. 3. Adjust the volume to a comfortable level. 4. Press the or button to change the track number. 5. To stop playback, press the Stop button. Troubleshooting PROBLEM POSSIBLE CAUSE SOLUTION No power Unit has not been turned on. Press the Play button to turn the power on. No battery is inserted. Insert proper battery. Battery is dead. Replace the battery with a new battery. I can’t hear Unit has not been turned on. Press the Play button to turn the power any music on. Volume is set too low. Press the Volume Up button to increase the volume to a comfortable level. No MP3 files have been Download MP3 files to the player. downloaded to the unit. The manager USB cable is not connected Make sure that the USB cables are software properly connected securely. doesn’t recognize the The DMP-210/220 is not turned on. Press the Play button to turn the power on. DMP-210/220 The drivers have not been Install the drivers off of the installation installed. CD. I can’t play The SMC card is not Remove the SMC card and insert it any tracks inserted correctly. securely. on the The SMC card is not Insert the SMC card into the SMC slot SmartMedia inserted. on the side of the DMP-210/220. card. There are no MP3 files on Run the Manager software and make the SMC card. sure that External memory is selected in the Drive drop-down box on the MP3 Device. Tips and Technical Support • When connecting the USB cable to the computer, ensure that the USB cable is inserted securely. Caution: • Listening at loud volumes for extended periods of time may damage hearing and may result in loss...