valutazioni - 1, GPA: 4
(
)
)
|
Facilità d'uso
2. Move the FUNCTION switch to CD. 3. Insert the CD you want to record into the CD compartment. 4. Select the track you want to record by pressing (SKIP/SEARCH) or (SKIP/SEARCH). Then press REC . TIP Pressing PAUSE instead of STOP/EJECT to momentarily interrupt recording gives you a much cleaner sound recording. U USING THE CD PLAYER FUNCTION PROGRAM REPEAT (SKIP/SEARCH) STOP (SKIP/SEARCH) PUSH PLAYING A CD 1. Set the FUNCTION switch to CD. “– –” flashes, and then “00” appears in the display if no disc is loaded. 2. Press ) PUSH to open the CD compartment cover. 3. Place a CD on the tray with the label side facing up. 4. Close the CD compartment cover. The total number of tracks on the disc appears in the display. 5. Press . Playback starts from track 1. The current track number appears in the display. To pause playback, press . “PLAY” flashes in the display. Press again to resume playback. To stop playback, press 7 (STOP). Wait a few seconds for the disc to stop turning completely, and then remove the disc. To remove the disc, open the CD compartment cover, hold the disc by the edges, and carefully pull it out. SKIP The skip function lets you quickly locate the beginning of any track on the CD, including the track currently being played. During playback: • Press (SKIP/SEARCH) once to return to the beginning of the current track. • Press (SKIP/SEARCH) twice in rapid succession to return to the beginning of the previous track. • Press (SKIP/SEARCH) to skip to the beginning of the next track. In stop mode: Press (SKIP/SEARCH) or (SKIP/SEARCH) repeatedly until the display shows the desired track number, and then press . Playback starts from the selected track. SEARCH • During playback, press and hold (SKIP/SEARCH) to move forward through a disc at high speed. • During playback, press and hold (SKIP/SEARCH) to move back through a disc at high speed. REPEAT PLAY The REPEAT button allows you to play the current track, all the tracks on the CD or the entire program repeatedly. Each time you press REPEAT, check the display to see which choice you have selected. • When “REP.” flashes in the display: The current track is played repeatedly. • When “REP.” lights up continuously in the display: All the tracks on the CD or the entire program are played repeatedly. PROGRAM PLAY 1. In stop mode, press PROGRAM to enter program create mode. “PROG.” and “01” start flashing in the display. 2. Press (SKIP/SEARCH) or (SKIP/SEARCH) to select a track number. 3. Press PROGRAM to store the selected track number in the program. 4. Repeat steps 2 and 3. You can store up to 20 tracks in the program. If you select more than 20 tracks, programmed tracks are overwritten from the first track. 5. Press to start program play. To confirm the order of programmed tracks, press PROGRAM in stop mode. To clear the program, press 7 (STOP) in stop mode. “PROG.” disappears from the display. PLAYING A CD-R OR CD-RW User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can be played only if they are already “finalized.” • You can play your original CD-Rs or CD-RWs recorded in music CD format. (However, they may not be played depending on their characteristics or recording conditions.) • Before playing CD-Rs or CD-RWs, read their instructions and cautions carefully. • Some CD-Rs and CD-RWs may not be played on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty. • CD-RWs may require a longer readout time. (This is caused by the fact that the reflectance of CD-RWs is lower than that of regular CDs.) CARE AND MAINTENANCE CLEANING THE EXTERIOR Disconnect the unit from AC power before cleaning the exterior of the unit with a soft dust cloth. HANDLING CDS • Do not touch the signal surfaces. Hold by the edges, or by one edge and the hole. • Do not affix labels or adhesive tape to the label surfaces. Also, do not scratch or damage the label. • Discs rotate at high speed inside the player. Do not use damaged (cracked or warped) discs. CLEANING CDS • Dirty discs can cause poor sound quality. Always keep discs clean by wiping them gently with a soft cloth from the inner edge toward the outer perimeter. • If a disc becomes dirty, wet a soft cloth in water, wring it out well, wipe the dirt away gently, and then remove any water drops with a dry cloth. • Do not use record cleaning sprays or antistatic agents on discs. Also, never clean discs with benzene, thinner, or other volatile solvents which may cause damage to the disc surface. VICTOR COMPANY OF JAPAN, LIMITED Display BEAT CUT 1 2 FM ST MONO BEAT CUT PHONES AC INO FM antenna Battery compartment Problem Solution • Make sure the AC power cord is securely plugged into an AC power outlet (or that the batteries are fresh). • Unplug the unit for a moment, and then plug it back in again. • Check the outlet by plugging in another device. • Adjust the volume setting. • Make sure you have selected the correct function: CD, TAPE, or TUNER, and headphones are disconn...
Questo manuale è adatto anche per i modelli :Lettori - LVT0999-003A (561.8 kb)