valutazioni - 2, GPA: 3.5 ( )

Produttore : Empire Comfort Systems File Size : 218.49 kb File Nome : 15f021e1-2234-f2c4-7593-6c36142cf74b.pdf Lingua di insegnamento:

Do not tighten clamps. 7. Insert the manifold pipe with valves attached into the clamps; open end of manifold should extend through hole in left side of frame. Tighten the manifold clamps. Burners are fastened to burner hangers already installed. Then assemble in same manner as above. CHECK FOR GAS LEAKS After assembly is complete, connect stove to gas supply and check for gas leaks before lighting. Make sure proper fittings are used for connection. (To operate gas valve, push in before turning.) 1. Turn brass control valve so knob is in vertical position until it is tight. (This shuts off flow of gas from the regulator to the burner. 2. Open LP cylinder valve or gas supply by 1/4 turn. This allows gas into the regulator and stops it at the brass control valve. 3. Apply gas detector fluid (or soapy dishwashing solution) on all connections, especially around the regulator, valve and POL-cylinder GRATE BURNER TOP 1/4" BOLT 1/4" HEX FLANGE NUT BODY LEG Model No. SE-200 w/SLK-28 VALVE KNOB connection. Any bub-bles that appear indicate a gas leak. If so, turn off gas and tighten the fitting. If a leak persists, pipe thread compound may be needed on the threads. NEVER USE A FLAME TO CHECK FOR GAS LEAKS. Cylinder Service Valve TO LIGHT 1. When you are sure there are no gas leaks, WRENCH TIGHTENED ASSEMBLY Regulator POL Connector Handwheel Pressure Relief Valve turn cylinder valve and brass control valve to closed position. (To operate gas valve, push in before turning.) 2. Re-open LP cylinder valve fully. 3. Re-open brass control valve 1/4 turn. 4. Keeping hands and face away from the top of the burner, light with a fireplace match or long-nose lighter. 5. Adjust the brass control valve for desired flame height. R-3088 Empire Comfort Systems, Inc. . 918 Freeburg Avenue . Belleville, IL 62220 Page 1 SECTIONAL PARTS FOR GAS STOVE SP-010 SP-011 SP-012 SP-064 SP-063 SP-065 SP-066 SP-067 SP-013 SP-014 SP-015 P-220 P-219 SW2-1 SW3-1 R-3445 SP-034 SP-062 P-221 R-3337 SP-028 SP-055 SP-016 S-1377 R-3339S-1380 S-1389 SP-010 One-Burner Top SP-013 One-Burner Drip Pan SP-028 Burner hanger SP-011 Two-Burner Top SP-014 Two-Burner Drip Pan R-3339 Grate SP-012 Three-Burner Top SP-015 Three-Burner Drip Pan SP-055 Round Burner SP-076 One-Burner Semi-Enclosed Frame* P-220 One-Hole Manifold SP-062 Star Burner SP-064 Two-Burner Semi-Enclosed Frame P-219 Two Hole Manifold SP-016 6" Low Leg SP-063 Three Burner Semi-Enclosed Frame P-221 Three Hole Manifold S-1377 28" High Leg SP-065 One-Burner Mini-Stove Frame SP-034 Manifold Clamp S-1380 32" High Leg SP-066 Two-Burner Mini-Stove Frame R-3337 Knob S-1388 Leg Brace for 32" High SP-067 Three-Burner Mini-Stove Frame R-3445 Gas Valve SW2-1 Two-Burner Windscreen * Not Shown SW3-1 Three-Burner Windscreen WARNING: NEVER PUT HANDS OR BURNER AIRSHUTTER KNOB DRIPPAN MANIFOLDCLAMPGASVALVE MANIFOLDSTOVE GRATE FACE DIRECTLY OVER BURNER WHILE LIGHTING You may adjust valve setting at this time. The flame should show a greenish blue inner cone...

Scarica la tua

Per scaricare, digitare 2 cifre :