valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Do not place any objects on the hob which might catch fire. . Do not clean the oven or the hob with steam or high-pressure cleaners. . If using hot air v, do not place greaseproof paper loosely in the oven (e.g. when heating the oven). The hot-air fan could draw in the paper which may damage the heater and fan. . Do not insert a baking sheet at the bottom of the oven, or cover it with aluminium foil, because a heat build-up would result. Roasting and baking times would change, and the enamel would be damaged. . Never pour water directly into the hot oven. Damage to the enamel could result. . Fruit juices dripping from the baking sheet leave spots that cannot be removed later. For baking, use the deeper universal baking pan. . Never stand or sit on the open oven door. . The oven door must close properly. Keep the door sealing surfaces clean. . Keep an eye on pressure cookers during the heat-up phase. As soon as the proper cooking pressure is reached, reduce the heat setting. . Please observe the separate operating instructions that came with your hob. Introducing: Your new Cooker Temperature selector with control lamp Hotplate control knobs Control lamp for hotplatesEasyClean® system (oven cleaning Function selector Electronic system) clock The control panel: . The switches are retractable. . To engage and disengage, depress the switch, making sure that it is in OFF position. Function selector Temperature selector 0 50100 150200250 . . . . . . . . . . . . . . . . . Settings: Settings: a Oven light 50–275 Temperature in °C k Defrosting position v Hot air e Top/bottom heat Z Surface grilling I Combination hot-air/surface grilling w Bottom heat x EasyClean® system (oven cleaning system) Introducing: Your new Cooker Accessories . Your appliance is supplied with: Order no. . The following accessories can be obtained from a specialist dealer: 1 Baking tray, enamelled 1 Wire shelf 1 Universal pan with grid Universal pan with grid Z 1230 X2 Souffle pan Z 1270 X2 Baking tray, aluminium Z 1330 X0 Baking tray, enamelled Z 1340 X2 Wire shelf, high/low Z 1430 X0 Wire shelf, close mesh Z 1440 X0 Roasting tray (only for use with Universal pan) Z 1510 X2 Pizza stone Z 1910 X0 Supplementary equipement set – Clou Z 1750 X0 Note: . The baking tray or universal pan may distort while the oven is operating. This is caused by major temperature differences on the utensil. These differences may occur if only one part of the utensil was covered or if deep-frozen food, e. g. pizza, was placed on the utensil. The distortion will already subside again during baking, roasting or grilling. Slide-in levels . Your oven features 4 slide-in levels. The slide-in levels are counted from bottom to top. The numbers are marked in the oven. When using hot-air baking or roasting, do not use slide-in level »2«, in order not to block air circulation. Before Using Your Appliance for the First Time Time of day . Before you use your appliance for the first time, it is necessary to set the current time on the electronic timer. . After connecting to the mains, or after a power failure, the display {:{{ will blink. Setting the time: Press the + button and set the current time with the rotary knob (e.g. |A:{{). Note: The time cannot be set if an automatic function is active (see Electronic clock for cancelling automatic function). Preliminary cleaning: 1. Clean the appliance exterior with a soft moistened cloth. 2. Clean the oven and the accessories with a hot detergent solution. . Please observe the operating instructions furnished with the hob. Initial burn-in 1. Heat the empty oven for approx. 30 minutes. Select top and bottom heat at a setting of 240° C. During the initial burn-in phase, please open the kitchen windows to dissipate unpleasant odours. 2. Operate cast-iron hotplates, without placing utensils on them, on the highest heat setting for about 1 to 2 minutes. The odour rising from the hotplates is caused by the burning-in of the corrosion protection, and occurs only during the initial use. Cooking Operating the hotplates . The z symbol on the switch panel represents the different hotplates and their respective switches. . After switching on one or more hotplates, the control lamp lights up. . The hotplate heat settings are infinitely variable. . Separate operating instructions apply to the hotplates. Before the initial use of the hotplates, please familiarise yourself with the information contained therein. Settings: Dependent on the features offered by your hob, the following hotplates are available: Standard hotplate 1. Turn the hotplate control knob to setting 9. 2. After the initial high-heat cooking phase, turn the control knob to a suitable setting for continuous cooking. . Intermediate settings between the heat settings 2 to 5 are marked by a dot. Dual-zone hotplate in glass-ceramic hobs 1. The dual-zone cooking zone is activated by turning the associated hotplate control knob to the o symbol. 2. The remaining settings are the same as th...
Questo manuale è adatto anche per i modelli :Piastra - E1541N2/01 (1.2 mb)
Piastra - E1541N2/05 (1.2 mb)
Piastra - E1541S2/01 (1.2 mb)
Piastra - E1541W2/01 (1.2 mb)