valutazioni - 2, GPA: 5
(
)
)
|
Facilità d'uso
For optimal air and quiet sound performance, use 8’’ round ductwork. Rough-in kit (supplied with P5 and P8 blowers) RBFIP Series Baffle Filters (Optional) - RMIP33 AND RMIP45 INSERT SYSTEM IN- LINE AND EXTERIOR BLOWERS Model 441 Model 437 (10” Rd wall cap) (High capacity roof cap) Model HLB9 (800 cfm) - 4 HL0068RMP Series Backsplash (Stainless Steel wall covering with warming shelves. Optional) RML3336S, RML3342S, RML4548S, RML4554S or RML4560S Custom Hood Liner (optional) Model 418 10” Rd adjustable elbow (optional)Model HLB3 (280 cfm) in-line blower (includes one 8” to 10” round transition) RMIP33 OR RMIP45 INSERT Model 331H (600 cfm) or 332H (900 cfm) exterior blower Model 335 (1200 cfm) or 336 (1500 cfm) exterior blower Model 441 (10” Rd wall cap) Model 421 (10” Rd. vert. in-line damper) Recommended for use with exterior blowers Model 410 (10” Rd duct - 2ft. sections) 10” Rd metal flexible duct (optional) 332KR in-line and exterior blower rough-in kit - Purchase separately. RMIPWC Wall control (Optional) RBFIP Series Baffle filters (Optional) Model HLB6 (600 cfm) in-line blower (includes two 4.” x 18.” to 10’’ round transitions) or HLB11 (1100 cfm) in-line blower (includes two 8” x 12” to 10’’ round transitions) 1. SELECT BLOWER OPTION AND INSTALL DUCTWORK Either an interior or exterior blower or in-line blower may be used with this insert.The insert model RMIP33 or RMIP45 must be installed with blower models P5, P8, HLB3, HLB6, HLB9, HLB11, 331H, 332H, 335 or 336 only. Other blowers cannot be substituted. (Blowers sold separately). Plan where and how the ductwork will be installed. Access to the top of the hood is preferred for connection of ductwork. As an alternative, flexible metal ductwork may be used. If installing in-line blower, refer to instructions packed with in-line blower and follow steps 1 up to 8, 13, 14, 16, 17, 19 and up of this manual. Install proper-sized ductwork, elbows and roof or wall cap for the type of blower you are installing. Use round ductwork, with a short section (about 4’ expanded) of flexible metal duct (optional) for attachment to the transition. Use screws to attach flexible metal duct to the rigid duct. Use 2” duct tape to seal duct joints. The minimum hood distance above cooktop must not be less than 24”. A maximum of 30” above cooktop is highly recommended for best capture of cooking impurities. Distances over 30” are at the installer and users discretion. Insert with interior blower Roof cap Wall cap HH0038A 7” or 8” round ductswith 7” or 8” round metal flex. duct (optional) 3 1/4”x 10”to 7”or 8”transition or 3 1/4”x 14”to 8”transition 24” minimum above cookingsurface MODEL P5 (SINGLE) OR P8 (DOUBLE) INTERIOR BLOWER TYPICAL DUCTWORK MODEL 331H, 332H, 335 OR 336 EXTERIOR BLOWER TYPICAL DUCTWORK ” 24” minimum above cookingsurface ” MODEL HLB3, HLB6, HLB9 OR HLB11 IN-LINE BLOWER TYPICAL DUCTWORK In-line blower 10” round duct HH0058A 24” minimum above cookingsurface 10” round metal flex. duct (optional) Roof cap Wall cap Insert 2. PREPARE THE INSTALLATION Make sure that the following items are included: -Insert -Accessories: • Filters (3 for RMIP33 model, 4 for RMIP45 model) • Bag of parts including: (4) lock nuts, (1) wire clamp, (8) no. 8 x 3/4” standard screws, (2) wire connectors, (2) no. 6 x 1/2” standard screws, (8) no. 8 x 3/8” screws. Discard items not used. Parts sold separately: -Interior blower Model P5 includes blower, rough-in kit, flow deviator and 31/4” x 10” adapter -Interior blower Model P8 includes blower, rough-in kit, flow deviator and 31/4” x 10” adapter and 31/4” x 14” adapter -In-line blower assembly HLB3, HLB6, HLB9 or HLB11 (all include transition) -In-line blower rough-in plate model 332KR, required for all In-line or Exterior Blowers -Exterior blower assembly 331H, 332H, 335 or 336 -Halogen lights 120V, 50W, PAR 20 (2 for RMIP33 model and 3 for RMIP45 model) -Custom hood liner Model RML3336S, RML3342S, RML4548S, RML4554S or RML4560S (optional) -Backsplash RMP Series (optional) -RMIPWC Remote control (optional) -Baffle filters RBFIP Series (optional) -Transitions, ducts (rigid and flexible), elbows, dampers, wall and roof caps. Refer to page 3 and 4 for a complete list of venting options and model numbers. NOTE: During installation, protect countertop and/or cooktop. - 5 3. INSTALL BACKSPLASH (OPTIONAL) It is recommended to install the backsplash before the custom hood insert. The custom hood will cover the backsplash top mounting screws. In order to be able to install the backsplash, make sure you have at least 18’’ clearance between bottom of custom hood and range control panel or cooktop. (See instructions packed with backsplash.) 4. CUSTOM HOOD PREPARATION WARNING When building a custom hood, always follow all applicable construction codes and standards. ! The custom hood frame must be sized to the shape and total weight of the insert assembly. Refer to the table below for total weight of the insert, according to the type of blower choosen...
Questo manuale è adatto anche per i modelli :Piastra - ELITE RMIP45 (5.37 mb)