Log:
valutazioni - 5, GPA: 4 ( )

Istruzioni per l'uso Honeywell, Modello TE923W

Produttore : Honeywell
File Size : 1.06 mb
File Nome : 7a26d542-9984-4aa3-8a76-225254f288b9.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


In this package you will find: One Main Unit (receiver) (TE923WD) One IR Remote Control (TS607) One Rain Gauge (remote rain sensor/transmitter) (TS906) One Anemometer (remote wind sensor/transmitter) (TS805) One UV (ultraviolet) sensor (remote ultraviolet sensor/transmitter) (TS704) One Five-Channel Temperature & Humidity Sensor (transmitter) (TS34C) One CD disk with generic PC connection software One USB cable One 7.5V AC/DC Adapter Mounting Hardware with Allen Wrench One User Manual Required for installation (not included) -Small Phillips screwdriver -Anemometer mounting pole -Small paper clip to reset sensors NOTE: If any items are missing or damaged, please contact Hideki Electronics Customer Service before proceeding with installation. 3 Standard Package Contents Picture Components Main Unit Remote Control AC/DC 7.5V power adaptor UV Sensor consists of: Sensor Unit U-Shaped Sensor holder Circular Ground Stand Stake Base Wall-Mounting Base Thermo Hygrometer Sensor Rain Gauge consists of: Funnel shaped top with battery compartment Rain Gauge bucket Bucket see-saw mechanism Protective screen Anemometer consists of: Wind Cups Wind Vane Anemometer arm Anemometer base Weather Capture CD ROM PC Software 4 4 screws for securing rain gauge to the flat surface; 4 screws for securing anemometer to vertical surface Mounting hardware 2m (6ft) USB cable PC connection cable Installation The Honeywell Professional Weather Station TE923W operates at 433MHz radio frequency, so no wire installation is required between the main unit (receiver) and the remote weather sensors (transmitters). The remote weather sensors include a thermo-hygrometer (temperature and humidity) sensor, UV (ultraviolet) sensor, anemometer (wind sensor) and a rain gauge (rain sensor). All data measured by these remote sensors is transmitted to the main unit wirelessly, with the operating range in the open area from 100 feet (30 meters) for anemometer and rain gauge; and up to 328 feet (100 meters) for thermo-hygrometer and UV sensors. Remote UV sensor, anemometer and a rain gauge must be placed outdoors to measure weather elements. Remote thermo-hygrometer can be placed indoors or outdoors, depending on the area where the temperature and humidity are intended to be measured. If you intend measuring outdoor temperature and humidity, place the remote sensor outdoors. NOTE: It is critical to assemble and power up all of the remote weather sensors BEFORE setting up the main unit. NOTE: It is critical to power up and test communication between all of the weather sensors and the main unit BEFORE permanently mounting them outside. 5 Before you begin • We recommend using alkaline batteries for the remote weather sensors and the main unit when temperatures are above 32°F (0°C). We recommend using lithium batteries for the remote weather sensors when temperatures are below 32°F (0°C). • Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct power requirements). • ALWAYS install batteries in the remote weather sensors before the main unit. • Insert batteries before first use, matching the polarity in the battery compartment • Remove protective plastic screen from LCD display (if any). • During an initial setup, place the main unit close to the remote weather sensors. • After reception is established (all of the remote readings will appear on the main unit’s display), position the remote sensors and the main unit within the effective transmission range of up to 328 feet (100 meters). Ideally they should be placed within the line of sight of the main unit. See placement tips in the user manual for each remote weather sensor separately. • Transmission range may be affected by trees, metal structures and electronic appliances. • The main unit must be placed indoors. • The effective operating range may be influenced by the surrounding building materials and how the receiver (main unit) and transmitters (weather sensors) are positioned. • Place the remote weather sensors so that they face the main unit (receiver), minimizing obstructions such as doors, walls, and furniture. Note: When the temperature falls below freezing, the batteries in the outdoor remote weather sensors may have reduced voltage supply and a shorter effective range. We recommend using lithium batteries at temperatures of 32°F (0°C) and below. IMPORTANT: Make sure that the remote weather sensors are easily accessible for cleaning and maintenance. We recommend cleaning the remote weather sensors periodically, as the dirt and debris may affect sensors accuracy. Ultraviolet (UV) Sensor FEATURES • Ultraviolet light levels measurement • Remote UV levels data transmission to the main unit via 433MHz signal • 328 feet (100 meters) operating range • Low battery indicator • Three different placement options – ground, stake and wall 6 A GB C D F E A GB C D F E A. LED INDICATOR • Flashes once when the remote sensor transmits a reading to the main unit • Flashes twice when battery...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie