valutazioni - 0, GPA: 0 ( )

Produttore : Bosch File Size : 1.37 mb File Nome : Lingua di insegnamento:

Information for test institutes Test institutes can request the conditions for running comparison tests by sending an e-mail to dishwasher@test-appliances.com. Quote the appliance number (ENr.) and the production date (FD) which you can find on the rating plate 9* on the appliance door. en Additional options * depending on model Additional options can be set with the buttons @. Y Express Wash/ Speed Perfect * The >>Express Wash/ Speed Perfect<< function can reduce the running time by approx. 20% to 50% depending on the selected rinse programme. The change in the running time is indicated on the digital display `. To obtain optimum cleaning results at a reduced running time, water and energy consumption are increased. §Half load * If you have only a few items to wash (e.g. glasses, cups, plates), you can switch to “half load”. This will save water, energy and time. It is recommended to put a little less detergent in the detergent dispenser than for a full load. –Timer programming * You can delay the start of the programme in 1 hour steps up to 19 hours. – Switch on the main switch (. – Press the timer programming button until the digital display ` jumps to ‚oe. – Keep pressing the timer programming button until the required time is displayed. – To delete the preselected starting time, press the button until ‹oe is indicated on the digital display `. You can change your programme selection at any time until the programme starts. Washing the dishes Programme data The programme data (consumption values) can be found in the summary of instructions. They refer to normal conditions and the water hardness set value …. Different influencing factors such as water temperature or line pressure may result in deviations. Aqua sensor * * depending on model The Aqua sensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water. The Aqua sensor is used according to the programme. If the Aqua sensor is active, “clean” rinsing water can be transferred to the next rinse bath and water consumption can be reduced by 2–4 litres. If the turbidity is greater, the water is drained and is replaced with fresh water. In the automatic programmes the temperature and running time can also be adjusted to the degree of soiling. Switching on the appliance – Turn on the tap fully. – Close the door. – Rotate programme selector 8 to the required programme. – Switch on the main switch (. The expected programme duration is indicated on the numerical display `. – The programme starts running. Remaining running time display When the programme is selected, the remaining running time of the programme is indicated on the digital display `. The running time is determined during the programme by the water temperature, the number of utensils as well as the degree of soiling and may vary (depending on the selected programme). en End of programme The programme has ended when the value ‹ is indicated on the numerical display `. Switching off the appliance...

Scarica la tua

Per scaricare, digitare 2 cifre :