valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
¦ 30 cm to an oil or coal- fired cooker. Connecting the appliance After installing the appliance, wait at least 1 hour until the appliance is switched on. During transportation the oil in the compressor may have flowed into the refrigeration system. Before switching on the appliance for the first time, clean the interior of the appliance ( see chapter “ Cleaning the appliance”) . en Electrical connection The socket must be near the appliance and also freely accessible following installation of the appliance. The appliance complies with the protection class I. Connect the appliance to 220- 240 V/50 Hz alternating current via a correctly installed socket with protective conductor. The socket must be fused with a 10 to 16 A fuse. For appliances operated in non- European countries, check whether the stated voltage and current type match the values of your mains supply match the values of the mains supply. This information can be found on the rating plate. Fig. * a= Warning Never connect the appliance to electronic energy saver plugs. Our appliances can be used with mains and sine-controlled inverters. Mains- controlled inverters are used for photovoltaic systems which are connected directly to the national grid. Sine-controlled inverters must be used for isolated applications ( e.g. on ships or in mountain lodges) which are not connected directly to the national grid. Getting to know your appliance Please fold out the illustrated last page. These operating instructions refer to several models. The features of the models may vary. The diagrams may differ. Fig. 1 * Not all models. 1- 5 Controls 6 No Frost System 7 Light (LED) 8* Freezer compartment flap 9 Glass shelf 10 Frozen food container ( small) 11 Frozen food container ( large) 12 Ventilation opening en Controls Fig. 2 1 Alarm button Used to switch off the warning signal, see chapter “ Alarm function”. 2 “super” button Switches super freezing on and off. Illuminates when super freezing is on. 3 Temperature selection button The required temperature is set with this button. 4 Temperature display Indicates the set temperature of the freezer compartment. 5 On/Off button Serves to switch the appliance on and off. Switching on the appliance Fig. 2 1. Switch on the appliance with the On/Off button 5. A warning signal sounds, the temperature display 4 and the “ alarm” button 1 flash. 2. Press the alarm button 1. The warning signal is switched off, the appliance starts to cool. The alarm button is lit and the temperature display flashes until the appliance has reached the set temperature. We recommend a factory setting of - 18 ° C in the freezer compartment. Operating tips ¦ After the appliance has been switched on, it may take several hours until the set temperature has been reached. Do not put any food in the appliance beforehand. ¦ The fully automatic No Frost system ensures that the freezer compartment remains free of ice. Defrosting is not required. ¦ Thesides of thehousing are sometimes heated slightly. This prevents condensation in the area of the door seal. ¦ If the freezer compartment door cannot be immediately re-opened after it has been closed, wait until the resulting low pressure has equalised. Setting the temperature Freezer compartment The temperature can be set from -16° C to -24° C. Keep pressing temperature setting button 3 until the required freezer compartment temperature is set. The value last selected is saved. The set temperature is indicated on temperature display 4. en Alarm functions The warning signal switches on if the freezer compartment is too warm. Switching off the warning signal Fig. 2 Press the alarm button 1 to switch off the warning signal. The display is reset to standby. Door alarm The door alarm ( continuous sound) switches on if the appliance door is open for longer than one minute. Close the door to switch off the warning signal. Temperature alarm The temperature alarm switches on if the freezer compartment is too warm and the frozen food is at risk of thawing. A beeping signal sounds. Alarm Temperature Explanation button display illuminates flashes Temperature alarm: Frozen food is not at risk of thawing. flashes flashes Thaw alarm: Frozen food is at risk of thawing. flashes illuminates Thaw alarm: At some time the freezer compartment was too warm. Frozen food is at risk of thawing. Temperature warning The alarm may switch on without any risk to the frozen food ¦ when the appliance is switched on, ¦ when large quantities of fresh food are placed in the appliance, ¦ if the freezer compartment door is open too long. Note Do not refreeze thawing or thawed food. Only ready meals ( boiled or fried) may be refrozen. No longer store the frozen produce for the max. storage period. Usable capacity Information on the usable capacity can be found inside your appliance on the rating plate. Fig. * Fully utilising the freezer volume The maximum amount of food can be placed in the freezer by removing all fittings. The food can be stacked d...
Questo manuale è adatto anche per i modelli :Frigoriferi - GI38NP60/05 (2.25 mb)
Lavastoviglie - GI25NP60/06 (2.25 mb)
Frigoriferi - GI38NP60/06 (2.25 mb)