(Normal Cycle) 7.2 6.0 6.0 6.0 7.2 6.7 6.7 Water Pressure (PSI) 20-120 20-120 20-120 20-120 20-120 20-120 20-120 Volts 120 120 120 120 120 120 120 AMPS* 10 10 10 10 10 8.5 8.5 Watts (Heating Element) 900 900 900 900 900 600 600 Color** B, S, Q, C B, S, Q, C, M S B, S B, S, Q B, S S Shipping Weight (Approx.) 69 Lbs. 64 Lbs. 163 Lbs. 67 Lbs. 63 Lbs. 61 Lbs. 139 Lbs. *Separate 15-amp 3-wire grounded circuit required '* B=Black-on-Black S=White-on-White Q=Bisque-on-Bisque C=Stainless Steel w

To prevent etching, try the following: ¦ Use less detergent. You may be using too much for the water hardness in your area. (See page 5.) ¦ Use a good quality dishwasher detergent. ¦ Do not overload the machine. Water should circulate freely to ensure adequate rinsing and draining. ¦ Fill the rinse aid dispenser (unless you have soft water in your area; in which case you may not need a rinse aid.) (See page 6.) ¦ Use a lower water temperature setting. ¦ Do not use the Heat Dry option. ¦ Do not p

¦ Make sure the door is properly balanced. To do this, open it a little and release it. It should stay where you released it. If it doesn’t, consult the Installation Instructions or contact your installer. ¦ Call your local water company to learn the water hardness in your area. You’ll need to know this to determine how much detergent and rinse aid to use. IMPORIMPORIMPORIMPORIMPORTTTTTANT SAFETY INSTRANT SAFETY INSTRANT SAFETY INSTRANT SAFETY INSTRANT SAFETY INSTRUCTIONSUCTIONSUCTIONSUCTIONSUCT

As with detergent, the amount of rinse aid needed for your dishes depends on the hardness of the water in your area. (See page 5.) Too much rinse aid can result in lather or foaming and cause cloudiness or streaks on your dishes. If the water in your area is very soft, you may not need rinse aid. If you do, you can dilute the rinse aid with an equal amount of water. Rinse aid adjustment dial The rinse aid dispenser has six settings. Always start with the dispenser set on “1.” If spots and poor d

Raising your water heater setting may help to shorten the cycle times. If this doesn’t resolve the problem, call the ASKO Advisory Center. is not caused by defective product workmanship or materials, you will be charged for a service call. Refer to page 12 to determine what is and is not covered under your warranty. If you’re still not sure, contact the ASKO Advisory Center before you call a service technician. Dishwasher does not drain Dishwasher does not drainDishwasher does not drain properly

¦ Read the “Washing Special Items” section before washing any porcelain or china that has “on-glaze” decoration, crystal glassware, or items of wood or plastic. ¦ Make sure the door is properly balanced. To do this, open it a little and release it. It should stay where you released it. If it doesn’t, consult the Installation Instructions or contact your installer. ¦ Call your local water company to learn the water hardness in your area. You’ll need to know this to determine how much detergent an

process by opening the door slightly to release the ¦ Wash only full loads. moist air.) ¦ Use the Pan program only for heavily soiled dishes. Page 7 SOLSOLUTIONSUTIONS TTO COMMON DISHWO COMMON DISHWASHING PRASHING PROBLEMSOBLEMS SOLSOLUTIONSUTIONS TTO COMMON DISHWO COMMON DISHWASHING PRASHING PROBLEMSOBLEMS As with any new appliance, it sometimes takes using it a few times to learn to operate it properly. If you are having minor performance problems with your dishwasher, read Poor washing perfor